Fastway / Pro Moto Billet Products:     Cargo Racks     Footpegs     FIT Handguards and Damper Mount     Kickstands     Spark Arrestors End Caps     Steering Stabilizers     Bar End Mounts  
              
 
Fastway FIT System 1-Piece Bar Clamp Handguards
Fastway Integrated Technology (FIT) System Handguards from Pro Moto Billet / Fastway Performance offer a strong, innovative method of mounting handguards to almost any dirt bike and some ATVs. The unique handlebar clamp mounting system eliminates cable, brake hose routing headaches and helps prevent the handguards from twisting on impact.

Fastway FIT Version 2 handguards provide a solid billet aluminum top bar clamp with integrated hand guard mount tabs for a rigid and clean mounting system. Keeps cables and brake lines from interfering with guards and impact deflectors from twisting upon impacts. The solid top clamp provides extra support for bikes with rubber mounted bar clamps that twist easily during crashes.

FIT v1 and v2 handguard systems are available in 90 x 40mm, 96-100 x 40mm, and 100-106 x 40mm bolt patterns to fit most fat bar applications and 100 x 33mm, and 106 x 33mm bolt patterns to fit most 7/8 inch bar applications.
 
 

Version 2 kit includes: 
1-Piece Billet Aluminum Bar Clamp, anodized Clear or Black Handguard Bars, Mounting Hardware, and a set of Shields.

 HOW TO DETERMINE WHAT TOP CLAMP YOU NEED:
A = The distance in "mm"; from the center of the left bolt hole to the center of the right bolt hole that hold your handlebars tight.

B = The distance in "mm"; from the center of the front bolt hole to the center of the rear bolt hole that hold your handlebars tight.
 

  For proper fit, please measure your handlebar mount bolt spacing before ordering. For help, see Top Clamp Measure Diagram above.
      Add to Cart
    90x40mm - Use on these bikes with original triple clamps with 1 1/8" Handlebar Size:
    KTM All offroad models 125-530 1998-22, Husqvarna 125-501 models 2014-22 and all Gas-Gas models made by KTM.


Version 2 - FIT Handguard Kit w/ Shields
90x40mm Bolt Pattern w/ CLEAR anodized bars (90mm side to side, 40mm front to back)   
---> All Fastway handguard kits now come w/ threaded bar inserts. Tap required for install is included.

 

$161.85
 
(In Stock)


Version 2 - FIT Handguard Kit w/ Shields
90x40mm Bolt Pattern w/ BLACK anodized bars (90mm side to side, 40mm front to back)   
---> All Fastway handguard kits now come w/ threaded bar inserts. Tap required for install is included.

 
$167.85
 
(In Stock)
 
       
    100-106x40mm - For 1 1/8" Bar Size  (Converted to 1 1/8" Bar Size - will not work with fat-bar adaptors)


Version 2 - FIT Handguard Kit w/ Shields
100-106x40mm Bolt Pattern w/ CLEAR anodized bars (100-106mm side to side, 40mm front to back)   
---> All Fastway handguard kits now come w/ threaded bar inserts. Tap required for install is included.

 

$161.85
 
(In Stock)


Version 2 - FIT Handguard Kit w/ Shields
100-106x40mm Bolt Pattern w/ BLACK anodized bars (100-106mm side to side, 40mm front to back)   
---> All Fastway handguard kits now come w/ threaded bar inserts. Tap required for install is included.

 

$167.85
 
(In Stock)
 
      Add to Cart
 94-100x40mm - For 1 1/8" Bar Size


Version 2 - FIT Handguard Kit w/ Shields
94-100x40mm Bolt Pattern w/ CLEAR anodized bars (94 to 100mm side to side, 40mm front to back)   
---> All Fastway handguard kits now come w/ threaded bar inserts. Tap required for install is included.

 

$161.85
 
(In Stock)


Version 2 - FIT Handguard Kit w/ Shields
94-100x40mm Bolt Pattern w/ CLEAR anodized bars (94 to 100mm side to side, 40mm front to back)   
---> All Fastway handguard kits now come w/ threaded bar inserts. Tap required for install is included.

 

$167.85
 
(In Stock)
    Cost Add to Cart
 

FIT v2 Top Clamp w/4 bolts
FW-V2-TC-904 - 90x40mm Top Clamp w/4 bolts (In Stock)
FW-V2-TC-065 - 100-106x40mm Top Clamp w/4 bolts (In Stock)
FW-V2-TC-xxx

 $79.95
EACH
 
(In Stock)
 
 Tap for Threaded Bar End Insert 5/8 x 11
FW-22-1-404		 $13.99
 
(In Stock)
 

FIT System Replacement Shields w/hardware
Dimensions: 5" tall X 9" wide

White Plastic w/Orange Graphics
White Plastic w/Blue-Yellow Graphics
White Plastic w/Blue Graphics
White Plastic w/Red Graphics
White Plastic w/Black Graphics
 Black Plastic w/Orange Graphics
Black Plastic w/White Graphics
Black Plastic w/Red Graphics
Black Plastic w/Blue Graphics
Orange Plastic w/Orange Graphics
Blue Plastic w/Black-Red Graphics
(NOTE: Fastway handguards are pre-drilled and threaded for easy shield installation)
FW-22-1-9xx

$24.95
 
 



 All Weather Wrap Shields
Designed to be used with full wrap around handguards. Durable and flexible enough to withstand impacts from trees or brush all while keeping your hands protected.
Dimensions:  15.5 x 14.25 x 0.13 in.
FW-22-1-926		 $43.95
 
 

FIT Replacement Handguard Set with Mounting Hardware
FW-22-1-195PBK - BLACK anodized
(Includes bar-end hardware and hardware to attach the bars to the center mount)

 $65.95
 
 

FIT Replacement Handguard Set with Mounting Hardware
FW-22-1-195P - CLEAR anodized
(Includes bar-end hardware and hardware to attach the bars to the center mount)

 $59.95
 

Grip Heaters
For use on any motorcycle or ATV with a battery and charging system or a lighting coil.

 
Go to Grip Heaters Page

Handguard Shields
Install over rigid handguards/deflectors and heated grips for the ultimate protection against the elements.
Giant Loop Bushwackers Handguard Shields
Go to Handguard Shields Page

Bar End Mount Kits
Handguard Bar End Set fit most alloy or steel handlebars and Renthal Twinwalls
Fastway Threaded Bar End Insert Conversion Kit
G2 Nylon Bar End Mount Kit

 
Go to Bar End Mount Kits






Fit Systems include: 
Left and right arm bars with the new bend
Shields w/graphics
Fastway threaded bar end hardware
Select Version 1, 2, or 3 center clamp

  Back to V2 90x40mm        Back to V2 100x106mm        Back to V2 94x100mm

  Back to V2 90x40mm        Back to V2 100x106mm        Back to V2 94x100mm
 
FIT Version 2 Top Clamp w/4 Bolts (FW-V2-TC-904)(FW-V2-TC-065)(FW-V2-TC-004)
 
Tap for Threaded Bar End Insert FW-22-1-404   (Below is image of threaded bar end insert that comes with the kits)
  
 
FIT Shields

  Back to V2 90x40mm        Back to V2 100x106mm        Back to V2 94x100mm        Back to Replacement Shields
FIT Shields - Black Plastic/Orange Graphics(FW-22-1-911) FIT Shields - White Plastic/Orange Graphics (FW-22-1-912)
 
FIT Shields - Black Plastic/Red Graphics (FW-22-1-901) FIT Shields - White Plastic/Blue-Yellow Graphics (FW-22-1-927)
 
FIT Shields - Black Plastic/Blue Graphics (FW-22-1-916) FIT Shields - White Plastic/Blue Graphics (FW-22-1-919)

  Back to V2 90x40mm        Back to V2 100x106mm        Back to V2 94x100mm        Back to Replacement Shields
FIT Shields - Black Plastic/White Graphics (FW-22-1-924) FIT Shields - White Plastic/White-Black Graphics (FW-22-1-925)
 
FIT Shields - Orange Plastic/Orange Graphics (FW-22-1-904) FIT Shields - White Plastic/Red Graphics (FW-22-1-906)
FIT Shields - Blue Plastic/Black-Red Graphics (FW-22-1-902)
 

  Back to V2 90x40mm        Back to V2 100x106mm        Back to V2 94x100mm        Back to Replacement Shields
 
 
All Weather Wrap Shields
All Weather Wrap Shields (FW-22-1-926) Dimensions:  15.5 x 14.25 x 0.13 in.
 
FIT Replacement Handguard Bar Sets
Replacement Handguard Bar Set anodized BLACK
Replacement Handguard Bar Set anodized CLEAR