Fastway / Pro Moto Billet Products:     Cargo Racks     Footpegs     FIT Handguards and Damper Mount     Kickstands     Spark Arrestors End Caps     Steering Stabilizers     Bar End Mounts  
              
 
Fastway FIT System Integrated Handguard and Adjustable Damper Mount
Fastway Integrated Technology (FIT) System Handguards from Pro Moto Billet / Fastway Performance offer a strong, innovative method of mounting handguards to almost any dirt bike and some ATVs. The unique handlebar clamp mounting system eliminates cable, brake hose routing headaches and helps prevent the handguards from twisting on impact.

Fastway FIT Version 1handguards provide an adjustable mounting point for Fastway System 3 and System 5 above bar steering stabilizers. v1 FIT systems are also compatible with Scotts and GPR above bar steering stabilizers.  The adjustable Damper Mount allows for proper stabilizer mounting position in all OEM handlebar settings. 

FIT v1 and v2 handguard systems are available in 90 x 40mm, 96-100 x 40mm, and100-106 x 40mm bolt patterns to fit most fat bar applications and 100 x 33mm, and 106 x 33mm bolt patterns to fit most 7/8 inch bar applications.
 
 

Version 1 kit includes: 
Top Bar Clamp with Integrated Handguard Mount Tabs, Adjustable Damper Mount Plate, anodized Clear or Black Handguard Bars, Mounting Hardware, and your choice of Shield and graphic colors.

HOW TO DETERMINE WHAT TOP CLAMP YOU NEED:
A = The distance in "mm"; from the center of the left bolt hole to the center of the right bolt hole that hold your handlebars tight.

B = The distance in "mm"; from the center of the front bolt hole to the center of the rear bolt hole that hold your handlebars tight.
 

  For proper fit, please measure your handlebar mount bolt spacing before ordering. For help, see Top Clamp Measure Diagram above.
      Add to Cart
    90x40mm - Use on these bikes with original triple clamps with 1 1/8" Bar Size:
    KTM All offroad models 125-530 1998-22, Husqvarna 125-501 models 2014-22.


Version 1 - FIT Handguard Kit w/ Shields
90x40mm Bolt Pattern w/ CLEAR anodized bars (90mm side to side, 40mm front to back)   
---> All Fastway handguard kits now come w/ threaded bar inserts. Tap required for install is included.

 

$194.85
 
(In Stock)


Version 1 - FIT Handguard Kit w/ Shields
90x40mm Bolt Pattern w/ BLACK anodized bars (90mm side to side, 40mm front to back)   
---> All Fastway handguard kits now come w/ threaded bar inserts. Tap required for install is included.

 

$200.85
 
(In Stock)
 
      Add to Cart
    100-106x40mm - For 1 1/8" Bar Size  (Converted to 1 1/8" Bar Size - will not work with fat-bar adaptors)


Version 1 - FIT Handguard Kit w/ Shields
100-106x40mm Bolt Pattern w/ CLEAR anodized bars (100-106mm side to side, 40mm front to back)   
---> All Fastway handguard kits now come w/ threaded bar inserts. Tap required for install is included.

 

$194.85
 
(Special Order)


Version 1 - FIT Handguard Kit w/ Shields
100-106x40mm Bolt Pattern w/ BLACK anodized bars (100-106mm side to side, 40mm front to back)   
---> All Fastway handguard kits now come w/ threaded bar inserts. Tap required for install is included.

 

$200.85
 
(Special Order)
 
       
    94-100x40mm - For 1 1/8" Bar Size


Version 1 - FIT Handguard Kit w/ Shields
94-100x40mm Bolt Pattern w/ CLEAR anodized bars (94 to 100mm side to side, 40mm front to back)   
---> All Fastway handguard kits now come w/ threaded bar inserts. Tap required for install is included.

 

$194.85
 
(Special Order)


Version 1 - FIT Handguard Kit w/ Shields
94-100x40mm Bolt Pattern w/ BLACK anodized bars (94 to 100mm side to side, 40mm front to back)   
---> All Fastway handguard kits now come w/ threaded bar inserts. Tap required for install is included.

 

$200.85
 
(Special Order)
    Cost Add To Cart








FIT v1 106x40mm Bolt Pattern w/ CLEAR anodized bars - for 1 1/8" bar size
Fits CR/CRF-R/CRF-X models 1997-2014
Includes adjustable top bar clamp/damper mount, anodized clear handguard bars, and mounting hardware. (Shields sold separately below)
No returns on closeout items. Subject to prior sale.
FW-22-21-064
$99.95
MSRP $179.95
 
(In Stock)
Quantity on hand:  2
    Cost Add To Cart
 

FIT v1 Top Clamp w/4 bolts
FW-V1-TC-904 - 90x40mm Top Clamp w/4 bolts Top Clamp w/4 bolts (In Stock)
FW-V1-TC-004 - 94-100x40mm Top Clamp w/4 bolts (Special Order)
FW-V1-TC-065 - 100-106x40mm Top Clamp w/4 bolts (Special Order)

 $109.95
EACH
 
 
 Tap for Threaded Bar End Insert 5/8 x 11
FW-22-1-404		 $13.99
 
(In Stock)
 

FIT System Replacement Shields w/hardware
Dimensions: 5" tall X 9" wide

White Plastic w/Orange Graphics
White Plastic w/Blue-Yellow Graphics
White Plastic w/Blue Graphics
White Plastic w/Red Graphics
White Plastic w/Black Graphics
 Black Plastic w/Orange Graphics
Black Plastic w/White Graphics
Black Plastic w/Red Graphics
Black Plastic w/Blue Graphics
Orange Plastic w/Orange Graphics
Blue Plastic w/Black-Red Graphics
(NOTE: Fastway handguards are pre-drilled and threaded for easy shield installation)
FW-22-1-9xx

$24.95
 
(In Stock)
 



 All Weather Wrap Shields
Designed to be used with full wrap around handguards. Durable and flexible enough to withstand impacts from trees or brush all while keeping your hands protected.
Dimensions:  15.5 x 14.25 x 0.13 in.
FW-22-1-926		 $43.95
 
 

FIT Replacement Handguard Set with Mounting Hardware
FW-22-1-195PBK - BLACK anodized
(Includes bar-end hardware and hardware to attach the bars to the center mount)

 $65.95
 
 

FIT Replacement Handguard Set with Mounting Hardware
FW-22-1-195P - CLEAR anodized
(Includes bar-end hardware and hardware to attach the bars to the center mount)

 $59.95
 

Grip Heaters
For use on any motorcycle or ATV with a battery and charging system or a lighting coil.

 
Go to Grip Heaters Page

Handguard Shields
Install over rigid handguards/deflectors and heated grips for the ultimate protection against the elements.
Giant Loop Bushwackers Handguard Shields
Go to Handguard Shields Page

Bar End Mount Kits
Handguard Bar End Set fit most alloy or steel handlebars and Renthal Twinwalls
Fastway Threaded Bar End Insert Conversion Kit
G2 Nylon Bar End Mount Kit

 
Go to Bar End Mount Kits






Fit Systems include: 
Left and right arm bars with the new bend
Shields w/graphics
Fastway threaded bar end hardware
Select Version 1, 2, or 3 center clamp

  Back to V1 90x40mm        Back to V1 100x106mm        Back to V1 94x100mm

  Back to V1 90x40mm        Back to V1 100x106mm        Back to V1 94x100mm
 
FIT Version 1 Top Clamp w/4 Bolts (FW-V1-TC-904)(FW-V1-TC-065)(FW-V1-TC-004)
 
Tap for Threaded Bar End Insert FW-22-1-404   (Below is image of threaded bar end insert that comes with the kits)
  
 
FIT Shields

  Back to V1 90x40mm        Back to V1 100x106mm        Back to V1 94x100mm        Back to Replacement Shields
FIT Shields - Black Plastic/Orange Graphics(FW-22-1-911) FIT Shields - White Plastic/Orange Graphics (FW-22-1-912)
 
FIT Shields - Black Plastic/Red Graphics (FW-22-1-901) FIT Shields - White Plastic/Blue-Yellow Graphics (FW-22-1-927)
 
FIT Shields - Black Plastic/Blue Graphics (FW-22-1-916) FIT Shields - White Plastic/Blue Graphics (FW-22-1-919)

  Back to V1 90x40mm        Back to V1 100x106mm        Back to V1 94x100mm        Back to Replacement Shields
FIT Shields - Black Plastic/White Graphics (FW-22-1-924) FIT Shields - White Plastic/White-Black Graphics (FW-22-1-925)
 
FIT Shields - Orange Plastic/Orange Graphics (FW-22-1-904) FIT Shields - White Plastic/Red Graphics (FW-22-1-906)
FIT Shields - Blue Plastic/Black-Red Graphics (FW-22-1-902)
 

  Back to V1 90x40mm        Back to V1 100x106mm        Back to V1 94x100mm        Back to Replacement Shields
 
 
All Weather Wrap Shields
All Weather Wrap Shields (FW-22-1-926) Dimensions:  15.5 x 14.25 x 0.13 in.
 
FIT Replacement Handguard Bar Sets
Replacement Handguard Bar Set anodized BLACK
Replacement Handguard Bar Set anodized CLEAR
 
CLOSEOUT
FW-22-21-064 - FIT v1 106x40mm Bolt Pattern w/ CLEAR anodized bars - for 1 1/8" bar size