Fastway / Pro Moto Billet Products:     Cargo Racks     Footpegs     FIT Handguards and Damper Mount     Kickstands     Spark Arrestors End Caps     Steering Stabilizers     Bar End Mounts  
              
Semi-Universal Mount FIT System Handguards
Lightest and best choice for most offroad motorcycles and some ATVs.
Fastway Integrated Technology (FIT) System Handguards from Pro Moto Billet / Fastway Performance offer a strong, innovative method of mounting handguards to almost any dirt bike and some ATVs. The unique handlebar clamp mounting system eliminates cable, brake hose routing headaches and helps prevent the handguards from twisting on impact.

Fastway FIT Version 3 handguards offer more versatility than v1 or v2 systems. The individual left and right bar clamp/guard mounts allow this system to fit varied applications, regardless of left-to-right bolt spacing. For KTMs and other bikes with solidly mounted bar clamps, we recommend the v3 system as there is very little strength advantage to using the solid top plate offered in the v2 system. For Hondas, Yamahas, Kawasaki, and other bikes with rubber mounted bar clamps, we recommend the v2 system with its solid top plate.

FIT v3 handguard systems are available in 40mm bolt spacing to fit most fat bar 1 1/8 inch applications and 33mm bolt spacing to fit most 7/8 inch bar applications.
 
 

Version 3 kit includes: 
Black Left and Right Bar Clamps, anodized Clear or Black Handguard Bars, Mounting Hardware, and a set of Shields.

 HOW TO DETERMINE WHAT TOP CLAMP YOU NEED:
A = The distance in "mm"; from the center of the left bolt hole to the center of the right bolt hole that hold your handlebars tight.

B = The distance in "mm"; from the center of the front bolt hole to the center of the rear bolt hole that hold your handlebars tight.
 

  For proper fit, please measure your handlebar mount bolt spacing before ordering. For help, see Top Clamp Measure Diagram above.
      Add to Cart
    40mm Bolt Spacing front to rear - (Fits most 1 1/8 inch Fat Bars)


FIT Handguard V3 Kit w/ Shields
40mm Bolt Spacing w/ CLEAR anodized bars (40mm front to rear)   
---> All Fastway handguard kits now come w/ threaded bar inserts. Tap required for install is included.

 

$139.85
 
(In Stock)


FIT Handguard V3 Kit w/ Shields
40mm Bolt Spacing w/ BLACK anodized bars (40mm front to rear)   
---> All Fastway handguard kits now come w/ threaded bar inserts. Tap required for install is included.

 
$145.85
 
(In Stock)
 
    Cost Add to Cart
    33mm Bolt Spacing front to rear - ( Fits most 7/8 inch Standard Bars)


FIT Handguard V3 Kit w/ Shields
33mm Bolt Spacing w/ CLEAR anodized bars (33mm front to rear)   
---> All Fastway handguard kits now come w/ threaded bar inserts. Tap required for install is included.

 

$139.85
 
(In Stock)


FIT Handguard V3 Kit w/ Shields
33mm Bolt Spacing w/ BLACK anodized bars (33mm front to rear)   
---> All Fastway handguard kits now come w/ threaded bar inserts. Tap required for install is included.

 
$145.85
 
(In Stock)
 
      Add to Cart
 

FIT v3 Top Clamp w/4 bolts
FW-V3-TC-040 - 40mm Top Clamp w/4 bolts (In Stock)
FW-V3-TC-033 - 33mm Top Clamp w/4 bolts (In Stock)

 $59.95
EACH
 
(In Stock)
 
 Tap for Threaded Bar End Insert 5/8 x 11
FW-22-1-404		 $13.99
 
(In Stock)
 

FIT System Replacement Shields w/hardware
Dimensions: 5" tall X 9" wide

White Plastic w/Orange Graphics
White Plastic w/Blue-Yellow Graphics
White Plastic w/Blue Graphics
White Plastic w/Red Graphics
White Plastic w/Black Graphics
 Black Plastic w/Orange Graphics
Black Plastic w/White Graphics
Black Plastic w/Red Graphics
Black Plastic w/Blue Graphics
Orange Plastic w/Orange Graphics
Blue Plastic w/Black-Red Graphics
(NOTE: Fastway handguards are pre-drilled and threaded for easy shield installation)
FW-22-1-9xx

$24.95
 
 



 All Weather Wrap Shields
Designed to be used with full wrap around handguards. Durable and flexible enough to withstand impacts from trees or brush all while keeping your hands protected.
Dimensions:  15.5 x 14.25 x 0.13 in.
FW-22-1-926		 $43.95
 
 

FIT Replacement Handguard Set with Mounting Hardware
FW-22-1-195PBK - BLACK anodized
(Includes bar-end hardware and hardware to attach the bars to the center mount)

 $65.95
 
 

FIT Replacement Handguard Set with Mounting Hardware
FW-22-1-195P - CLEAR anodized
(Includes bar-end hardware and hardware to attach the bars to the center mount)

 $59.95
 

Grip Heaters
For use on any motorcycle or ATV with a battery and charging system or a lighting coil.

 
Go to Grip Heaters Page

Handguard Shields
Install over rigid handguards/deflectors and heated grips for the ultimate protection against the elements.
Giant Loop Bushwackers Handguard Shields
Go to Handguard Shields Page

Bar End Mount Kits
Handguard Bar End Set fit most alloy or steel handlebars and Renthal Twinwalls
Fastway Threaded Bar End Insert Conversion Kit
G2 Nylon Bar End Mount Kit

 
Go to Bar End Mount Kits






Fit Systems include: 
  Left and right arm bars with the new bend
  Shields w/graphics
  Fastway threaded bar end hardware
  Select Version 1, 2, or 3 center clamp

  Back to V3 40mm Bolt Spacing        Back to V3 33mm Bolt Spacing

  Back to V3 40mm Bolt Spacing        Back to V3 33mm Bolt Spacing
 
FIT Version 3 Top Clamp w/4 Bolts (FW-V3-TC-033)(FW-V3-TC-040)
 
Tap for Threaded Bar End Insert FW-22-1-404   (Below is image of threaded bar end insert that comes with the kits)
  
 
FIT Shields

  Back to V3 40mm Bolt Spacing        Back to V3 33mm Bolt Spacing        Back to Replacement Shields
FIT Shields - Black Plastic/Orange Graphics(FW-22-1-911) FIT Shields - White Plastic/Orange Graphics (FW-22-1-912)
 
FIT Shields - Black Plastic/Red Graphics (FW-22-1-901) FIT Shields - White Plastic/Blue-Yellow Graphics (FW-22-1-927)
 
FIT Shields - Black Plastic/Blue Graphics (FW-22-1-916) FIT Shields - White Plastic/Blue Graphics (FW-22-1-919)

  Back to V3 40mm Bolt Spacing        Back to V3 33mm Bolt Spacing        Back to Replacement Shields
FIT Shields - Black Plastic/White Graphics (FW-22-1-924) FIT Shields - White Plastic/White-Black Graphics (FW-22-1-925)
 
FIT Shields - Orange Plastic/Orange Graphics (FW-22-1-904) FIT Shields - White Plastic/Red Graphics (FW-22-1-906)
 
FIT Shields - Blue Plastic/Black-Red Graphics (FW-22-1-902)
 

  Back to V3 40mm Bolt Spacing        Back to V3 33mm Bolt Spacing        Back to Replacement Shields
 
All Weather Wrap Shields
All Weather Wrap Shields (FW-22-1-926) Dimensions:  15.5 x 14.25 x 0.13 in.
 
FIT Replacement Handguard Bar Sets
Replacement Handguard Bar Set anodized BLACK
Replacement Handguard Bar Set anodized CLEAR