Free shipping Shopping cart Gift certificates
Bolt Products    Euro Style Bolt Kits    Japanese Style Bolt Kits    CR/CRF Bolt Kits    KTM/Husaberg Bolt Kits    KX/KXF Bolt Kits    YZ/YZF Bolt Kits    ATV Bolt Kits    Chain Adjuster Blocks    Bodywork Fastener Kit    Valve Stem Grommets/Caps Kit
 
Bolt Kits and Chain Adjuster Blocks for Suzuki RM/RM-Z

    Availability Guide: If you order an item that is not in stock, we will not charge your card until the order is ready to ship.

      = Normally ships the same business day     = Ships in 1 to 2 business days    = Backordered from supplier
  Bolt Motorcycle Hardware Products  Cost  Add To Cart 
Suzuki RM/RMZ Pro-Pack: Factory Style Hardware Kit
Designed for RM-Z 250/450 2001-to current, RM-X 450Z 2010-12
Includes over 180 pieces of OEM style hardware in factory style and finish.
BO-RMPP

$44.99
MSRP $54.95
 
Japanese Track Pack II: Universal Factory Style Hardware Kit
Designed for late model motocross and offroad Japanese motorcycles including Honda, Yamaha, Kawasaki, and Suzuki. Factory style 54 pieces of factory style hardware including: M5, M6 and M8 hex flange bolts, locking and non-locking flange nuts, washers, screws and a rear fender t-nut.
BO-JAPTP

$14.99
MSRP $15.99
 
Hub-Savers Kit - Silver Finish
Double Locked Sprocket Fastening Kit - includes six class 10.9 silver zinc plated steel sprocket bolts with factory style metal-locking or "Fuji" nuts.
BO-SP-BOLT

$9.99
MSRP $10.99
 
Hub-Savers Kit - Black Finish
Double Locked Sprocket Fastening Kit - includes six class 10.9 silver zinc plated steel sprocket bolts with factory style metal-locking or "Fuji" nuts.
BO-SP-BOLT-BK

$9.99
MSRP $10.99
 
  Billet Chain Adjuster Blocks  Cost  Add To Cart 
Billet Chain Adjuster Block - Red
Fits RM-Z 250/450 2004-16, RM-X 450Z 2010-12
Designed to hold your offroad motorcycle wheel precisely in place while you tighten your chain.
BO-CHADRMRD

$45.99
MSRP $54.99
 

Larger Images

Bolt Motorcycle Hardware Suzuki Products - Larger Images
Suzuki RM/RM-Z Pro-Pack: Factory Style Hardware Kit
Fits RM/RM-Z model years 2001 to current. There's a lot of yellow at Bolt HQ. Suzuki has been the bike of choice since the 90's for our founder, so you can be sure no efforts were spared in the development of this kit. Includes over 180 pieces of OEM style hardware in factory style and finish including: shroud bolts, seat bolts, sub-frame bolts, fork guard bolts, rotor bolts, a full set of sprocket bolts, t-nuts, factory style aluminum bushing for the bodywork, rim lock spacers, valve stem grommets & caps, Fuji lock nuts, factory style bolts, and drain plug washers. Now includes our new thread chasers.

Bolt hardware meets or exceeds OEM specs. Proudly designed and assembled in the USA with components from the USA and Taiwan.

Japanese Track Pack II:  Universal Factory Style Hardware Kit
The number one aftermarket fastener kit! The Japanese Track Pack has 54 pieces of factory style hardware including: M5, M6 and M8 hex flange bolts, locking and non-locking flange nuts, washers, screws and a rear fender t-nut.

Designed for late model motocross and offroad Japanese motorcycles including Honda, Yamaha, Kawasaki, and Suzuki. Bolt hardware meets or exceeds OEM specs. Proudly designed and assembled in the USA with components from the USA and Taiwan.

 

Hub-Savers "Double Locked" Sprocket Fastening Kit   Hub-Savers Sprocket Bolts Installation Instructions
Fits all Japanese and most European dirt bikes. This kit includes six class 10.9 zinc plated steel sprocket bolts with factory style class 10.9 Fuji metal-locking nuts and washers. Each sprocket bolt has medium strength thread lock patches pre-applied, which liquefies and anaerobically seals when the bolt is tightened for a double-lock. This kit also includes an 8mm socket tool insert for socket wrenches.

Important installation information:
Hub-Savers are the strongest, most complete sprocket fasteners available and have been developed and tested at the professional level in both motocross and off-road applications. Sprocket bolts are a critical fastener and must be installed properly to ensure your safety and to avoid damaging your machine. To insure long and reliable use of these quality fasteners:
  First clean and inspect your hub. If the hub is damaged or if the mounting holes are oval, the hub must
 Use the included Allen insert in an 8mm socket wrench to install the sprocket bolts.
  Refer to your owner's manual for the proper torque (typically 25 ft lbs), take the torque reading on the nut side.
Never over-tighten sprocket bolts!
If your sprocket bolts become loose, they must be replaced! Sprocket bolts become loose only under extreme stress, an indication that either they were installed improperly or there is a problem with the drive line. Check the drive line for bent chain guides, bad wheel alignment, damaged mounting holes on the hub, etc. Properly tightened sprocket bolts on properly functioning drive lines will remain tight indefinitely.

Bolt hardware meets or exceeds OEM specs. Proudly designed and assembled in the USA with components from the USA and Taiwan.
Suzuki Billet Chain Adjuster Blocks - Red How to install chain adjuster blocks on an offroad motorcycle
 
The innovative Billet Aluminum Chain Adjuster Blocks hold your wheel precisely in place while you tighten your chain. Our unique design features an integrated bolt slot so your blocks stay in position even when the axle is removed. Now making your chain adjustments requires only one 10mm wrench! Each anodized 6061 aluminum block has permanently laser etched aligning marks. Our aligning marks are placed so that only one mark engages at a time making aligning a snap! Fasteners have anti-seize compound pre-applied to the threads. Includes two free Bolt stickers. Select the Product Video tab to view the installation instructions.

This hardware meets or exceeds OEM specs. Proudly made in the USA. Customer satisfaction is guaranteed.

 
 
 
Euro Style Offroad Pro-Pack Bolt Kits, Euro Style Offroad Track Pack Bolt Kits, Hub-Savers Double Locked Sprocket Fastening Kits, KTM Aluminum Billet Chain Adjuster Blocks, ATV Bolt Kits, Honda Aluminum Billet Chain Adjuster Blocks, KTM Aluminum Billet Chain Adjuster Blocks, Yamaha Aluminum Billet Chain Adjuster Blocks, Suzuki Aluminum Billet Chain Adjuster Blocks, Honda CRF Pro-Pack Bolt Kits, Honda CRF Track Pack Bolt Kits, Japanese Pro-Pack Bolt Kits, Japanese Track Pack Bolt Kits, Japanese ATV Pro-Pack Bolt Kits, ATV Track Pack Bolt Kits for Sport and Utility ATVs, Hub-Savers Kit, sprocket bolts, Brembo style brake pin clips, Honda factory style hardware, factory style metal-locking or Fuji nuts, offroad motorcycle bolt kits, offroad bike bolts, hex head flange bolts, fastener kits, screws, pan head screws, cotter pins, aluminum compression washers, flat washers, fender washers, rim lock bushings, collar washers, phillips flush mount screws, split lock washers, subframe bolts, 8mm hex -—mm flange bolts, KTM factory style flange bolts, rim lock spacers, KTM factory style hardware, billet aluminum bushings, silver zinc plated steel sprocket bolts, Husaberg pro-pack bolt kits, KTM Bodywork Fastener Kits, Honda Bodywork Fastener Kits, Yamaha Bodywork Fastener Kits, Suzuki Bodywork Fastener Kits, Kawasaki Bodywork Fastener Kits