Go to Free Shipping Info

  Bike Stands
  Body Kits
  Bolt Kits
  Cargo Racks
  Computers
  Fender Packs
  Footpegs
  Gas Tanks
  Kickstands
  Motorcycle Luggage
  Ramps- MC
  Rim Locks
  Seats
  Tugger Lift Straps
  Auto Clutches
  Chain Adjusters
  Brake Discs
  Brake Pads
  Chains
  Left Hand Rear Brakes
  Sprockets
  Batteries
  Battery Chargers
  Dual Sport Kits
  Lighting Kit- KTM
  LED Lights
  Switches
  Turn Signals
  X2 Headlights
  Air Filters
  Auto Clutches
  Jetting Kits
  Filter Screen Bolts
  Fuel Filters
  Fuel Injection Tuners
  Oil Filters
  Quickshot 3
  Valve Shim Kits
  Spark Arrestor Endcaps
  Header Pipes
  Heat Shields - KTM
  Mufflers/Silencers
  Pipe Guards
  Bar End Mounts
  Deflectors
  Grip Heaters
  Grips
  Handguards
  Left Hand Rear Brakes
  Levers
  Steering Stabilizers
  Switches
  Throttle Cables
  Throttle Cam Systems
  Clutch Slave Cylinders
  Disc Guards
  Heat Shields - KTM
  Pipe Guards
  Radiator Guards
  Skid Plates
  Basegear
  Bike to Bike Intercom
  Boots
  Drink Systems
  Fanny Packs
  Gloves
  Helmets
  Jackets
  Jersey
  Pants
  Waterproofing Spray
  Fork Seal Protector
  Seals/Bearings
  Steering Stabilizers
  Motion Pro Tools
  Pocket Chainsaw
  Spoke Torque Wrenches
  TiProlight Wrenches
  Tire/Chain Tools
  Tire Changing Stand
  Tire Combo Levers
  Tire Lever Adapters
  Tool Packs
Authorized Dealer for:



Go to BlueRibbon Coalition Website
 
Motion Pro Products    Bearing Tools   Chain Tools    Ergo Spoke Wrenches    T-6 Combo Wrench/Tire Tool    TiProlight Wrenches    Rim Locks    Tire Changing Stand    Tire Tools    Throttle Cables    Misc. Tools    Misc. Items
Micro Bleeders / Fork Cap Tools
Micro Bleeder Orange Micro Bleeder Black Micro Bleeder Silver Micro Bleeder Gold Fork Cap Tool KTM Fork Cap Tool Fork Cap Tool - Showa Fork Alignment Tool

    Availability Guide: If you order an item that is not in stock, we will not charge your card until the order is ready to ship.

      = Normally ships the same business day     = Ships in 1 to 2 business days    = Backordered from supplier
Motion Pro Micro Bleeders

Cost

Add To Cart

M4x0.7, WP 43mm-48mm without External Preload - Orange
MP-11-0081
$13.99
MSRP $14.99
 
For use on all 1999 and later WP 43/WP 48 fork caps (KTM part nos. 4860.0020S and 4860.0020S1) without external spring preload adjustment. These fork caps DO NOT require a pin spanner to remove the fork cap. 
M4x0.7, WP 48mm with Adjustable Preload - Black
MP-11-0080
$13.99
MSRP $14.99
 
For 2007 or later SX/SXF/XC/XCF/XCW models with WP 4860 MXMA CC Closed Cartridge fork caps (KTM part no. 4860.0516S1). And for use on all 1999 and later WP 43/WP 48 fork caps (KTM part nos. 4860.0074S and 4860.0075S) with external spring preload adjustment. These fork caps require a 4-pin spanner (MP P/N 08-0290) to remove the fork cap. 
Micro Bleeder M5x0.8 Silver - for KYB forks
MP-11-0095
$13.99
MSRP $14.99
 
For use on most KYB inverted forks with a M5x0.8 air bleed screw in the fork cap. Fits on many late model Japanese offroad motorcycles. 
Micro Bleeder M5x0.8 Gold - for Showa forks
MP-11-0089
$13.99
MSRP $14.99
 
For use on most Showa inverted forks with a M5x0.8 air bleed screw in the fork cap. Fits on many late model Japanese offroad motorcycles. 
Motion Pro Fork Tools

Cost

Add To Cart

Fork Cap Socket, WP4CS Fork
Fits 2014 KTM XC models and all 2013-14 Husaberg with WP 4860 4CS forks.
For removing and installing LH and RH adjustable fork caps. Allows you to properly torque the fork cap assemblies during installation.
MP-08-0573

$23.99
 
Fork Cap Tool for KTM
Fits open chamber fork caps with the 4-holes in the cap
(KTM part no. 48600074S9)
MP-08-0290
$21.99
MSRP $22.95
 
Fork Cap Tool for KYB - 49mm
For removing the fork cap and compression cartridge on twin chamber KYB forks found on late model Honda, Husqvarna, Kawasaki, and Yamaha offroad motorcycles.
MP-08-0531
$36.99
MSRP $39.99
 
Fork Cap Tool for Showa - 50mm
For removing the fork cap and compression cartridge on twin chamber Showa forks found on late model Honda, Kawasaki, and Suzuki offroad motorcycles.
MP-08-0499
$36.99
MSRP $39.99
 
ForkTru - Fork Alignment Tool
For aligning front forks to ensure they are parallel from top to bottom.
MP-08-0412
$24.99
MSRP $29.95
 

Larger Images

  Micro Bleeders/Fork Cap Tools - Larger Images
Micro Bleeder Orange (MP-11-0081)
Features:
For use on all 1999 and later WP 43/WP 48 fork caps (P/N's 4860.0020S and 4860.0020S1) without external spring preload adjustment. These fork caps DO NOT require a pin spanner to remove the fork cap
New ultra-compact, low profile design is only 11mm high installed
Stainless steel body is stronger and will not corrode
Easy to install, simply replace the OEM bleeder screw with the Micro Bleeder
Reduces harshness caused by air build-up
Allows bleeding of air pressure without tools
One of the easiest bolt-on upgrades you can make to your forks
Kit includes two bleeder valves

Micro Bleeder Black (MP-11-0080)
Features:
 For 2007 or later SX/SXF/XC/XCF/XCW models with WP 4860 MXMA CC Closed Cartridge fork caps (P/N 4860.0516S1). And for use on all 1999 and later WP 43/WP 48 fork caps (P//N's 4860.0074S and 4860.0075S) with external spring preload adjustment. These fork caps require a 4-pin spanner (MP P/N 08-0290) to remove the fork cap.
 New ultra-compact, low profile design is only 11mm high installed
 Stainless steel body is stronger and will not corrode
 Easy to install, simply replace the OEM bleeder screw with the Micro Bleeder
 Reduces harshness caused by air build-up
 Allows bleeding of air pressure without tools
 One of the easiest bolt-on upgrades you can make to your forks
 Kit includes two bleeder valves

Micro Bleeder KYB (silver) (MP-11-0095) and Showa (gold) (MP-11-0089)
Features:
 For use on most KYB (silver) and Showa (gold) inverted forks with a M5x0.8 air bleed screw in the fork cap
 New ultra-compact, low profile design is only 11mm high installed
 Stainless steel body is stronger and will not corrode
 Will fit on many late model Japanese off-road motorcycles
 Easy to install, simply replace the OEM bleeder screw with the Micro Bleeder
 Reduces harshness caused by air build-up
 Allows bleeding of air pressure without tools
 One of the easiest bolt-on upgrades you can make to your forks
 Kit includes two bleeder valves


Fork Cap Socket, WP4CS Fork (MP-08-0573)

Features:
 Fits 2014 KTM XC models and all 2013-14 Husaberg with WP 4860 4CS forks
 For removing and installing LH and RH adjustable fork caps
 Allows you to properly torque the fork cap assemblies during installation
 17mm hex head
 Made from billet 6061 T-6 aluminum
 Anodized finish with laser engraving
 Caution: Always wear safety glasses and refer to the fork manufacturer for correct assembly and disassembly procedures.

Fork Cap Tool for KTM and CR Seal Retainer (MP-08-0290)

Features:
 Versatile design features a 22mm hex and 3/8 in. square drive.
 Precision design prevents damage to the retainer ring after peened stakes have been removed by drilling
Replaces the OEM Honda tool to remove and replace the rear wheel bearing / seal retainer ring, part number 41231-430-000
 Also for use on: CR250R 78-83, CR450R 81, CR480R 82
 This tool allows removal and replacement of the accessory fork cap KTM part# 48600074S
 The tool is slotted to allow removal and replacement of caps with the MP-11-0081 (above) Micro Bleeders

Fork Cap Tool for KYB - 49mm (MP-08-0531)

Features:
 For removing the fork cap and compression cartridge on twin chamber KYB forks found on late model Honda, Husqvarna, Kawasaki, and Yamaha offroad motorcycles
 Outer ring fits 49 mm octagonal fork cap
 Inner body holds cartridge so it can be removed from fork cap
 Outer ring can be clamped in vise to hold fork cap securely while cartridge is being removed
 Provides more secure grip on fork cap and cartridge and reduces risk of damage during disassembly
 Easier and faster to use than any other tool now available
 Billet 6061 aluminum construction with anodized blue finish
 1/2 inch square drive
 Lifetime limited warranty from Motion Pro

Fork Cap Tool for Showa - 50mm (MP-08-0499)

Features:
 
For removing the fork cap and compression cartridge on twin chamber Showa forks found on late model
   Honda, Kawasaki, and Suzuki offroad motorcycles
 Outer ring fits 50 mm octagonal fork cap
 Inner body holds cartridge so it can be removed from fork cap
 
Outer ring can be clamped in vise to hold fork cap securely while cartridge is being removed
 Provides more secure grip on fork cap and cartridge and reduces risk of damage during disassembly
 Easier and faster to use than any other tool now available
 Billet 6061 aluminum construction with anodized blue finish
 1/2 inch square drive
 Lifetime limited warranty from Motion Pro
ForkTru - Fork Alignment Tool (MP-08-0412)
Features:
 
Quick and easy to use tool for aligning front forks to ensure they are parallel from top to bottom
 Knurled adjustment screws for easy setup
 Reduces stiction and improves the performance of your front suspension
 Reduces seal and bushing wear
 Fits most MX and Off-Road motorcycles (does not work on most sport bikes due to large brake rotor diameter and 17 inch wheel diameter)
 Will work on 27 mm - 62 mm fork legs and tubes
 Works on forks that are 140 mm to 220 mm on center
 Patented design
 
 


Go to 6D ATR-1 Offroad Helmets
Go to Acerbis Products
Go to All Balls Racing
Go to ARC Composite Levers
Go to Micro-Start Power Supply Kit
Go to Arai Helmets
Go to Battery Tender products
Go to BikeMaster Products
Go to Bolt Motorcycle Hardware Products
Go to Boyesen Products
Go to BRP Page
Go to Bullet Proof Designs
Go to Clarke Manufacturing Gas Tanks Products
Go to CV4 Cooling Products
Go to Cycra Racing Products
Go to DID Racing Chains
Go to Dirt Tricks Products
Go to EBC Brakes
Go to ELine Skid Plates
Go to Enduro Engineering Products
Go to Fasst Company Products
Go to Fastway Products
Go to FMF Products
Go to Flatland Racing Products
Go to G2 Ergonomics Products
Go to Gearne Offroad/Motocross/Dual Sport Boots
Go to Giant Loop Motorcycle Luggage
Go to Hammerhead Products
Go to Heat Demon Handlebar Grip warmers
Go to HiFlo Oil Filters
Go to HotCams Products
Go to IMS Gas Tanks
Go to Ironman Sprockets Products
Go to JD Jetting Products
Go to JT Sprockets
Go to Klim Technical Riding Gear Products
Go to Leatt-Brace Products
Go to MSR Products
Go to Moose Racing Products
Go to Motion Pro Tools
Go to No-Toil Products
Go to Ogio Hydration Back Packs, Flight Vest, Toolbag, and Accessories
Go to Ohlins Steering Stabilizers

Go to Pivot Works Seals and Bearings
Go to Pocket ChainSaw - The World's Fastest Cutting Pocket Saw
Go to Pro Moto Billet Products
Go to ProTaper Grips
Go to Ram Mounts
Go to Rekluse Products
Go to Renthal Sprockets and Chains
Go to Ricochet Skid Plates
Go to Risk Racing Seal Doctor Tool
Go to Scotts Performance Page
Go to Seat Concepts - Complete Seats and Comfort Seat foam and Cover
Go to Shock Sox Removable Fork Seal Protector
Go to Shorai Batteries

Go to Spider Grips

Go to Trail Tech Products
Go to BikeMaster TruGel Batteries
Go to Tubliss Products page
Go to Tugger Products
Go to Vision X Solstice Solo Offroad Light Pods
Go to Wolfman Enduro Bags

 
 
 
          1998 - 2017 CycleBuy.com, All rights reserved. / Order Policies / Privacy Policy
Unauthorized use of any images, descriptions, or editorial content without permission is strictly prohibited.
Address:  1116 S Commercial Way SE, Albany, Oregon 97322 U.S.A.