Free shipping Shopping cart Gift certificates


  
2017 ST 120 RAW - Aggressive Looks, Meets Aggressive Pricing
The Timbersled ST 120 RAW is the best priced Timbersled system…ever. Don't let the low price fool you - the ST 120 RAW comes feature-packed; and full of Timbersled performance technology. Ride the ST 120 RAW, and feel how price and performance come together in this awesome Timbersled snow bike system.
Features / Specifications / Installation
ST 120 RAW - What's included: ST 120 Raw track system, 10" Backcountry ski and spindle, new EK X-ring chain, 5' brake line. Requires TSS or Solid Strut Install Fit Kit.
 
More Features:

Features

AGGRESSIVE LOOKS COME STANDARD
The ST 120 RAW features our latest side panel design that saves weight and adds strength and styling.

PRECISION HANDLING
The ST 120 RAW provides crisp handling on any terrain by using our proven non-pivoting front suspension arm.

THE ULTIMATE ON-TRAIL AND DEEP POWDER TRACTION
The Timbersled Convex 2.5 track comes standard on the ST 120 RAW; providing unrivaled trail and mountain performance.

RMK® TECHNOLOGY
The ST 120 RAW is infused with RMK technology- including the new I-beam rails and bump stops.

NEW EK X-RING CHAIN
All 2017 Timbersled Systems feature the EK X-Ring chain with proven strength, durability and performance on all 2011-2015 models.

RYDE FX SHOCKS
The ST 120 RAW utilizes custom valved RYDE FX MPV Motion Control coil over shocks to provide a great ride in all terrain.

NEW TIMBERSLED SUSPENSION STRUT (TSS) (Optional)
Add TSS and restore that dirt bike "pivot" in the rear suspension that we’ve all dreamt of but that snow bikes have never had. TSS adds 8.5" of additional plush suspension and makes the Timbersled feel shorter and more nimble.

 
 
How It Works
Take your bike from dirt to snow with Timbersled.
Timbersled systems fit a wide range of modern motocross and off-road dirt bikes from the early 90’s to today.
-----------

 
A Timbersled System includes a front ski and a rear track system that replace the tires on your bike to allow you to ride all year.
-----------

 
Timbersled systems are universal and require an Install Kit that is motorcycle specific.
-----------

 
Install your Timbersled system in less than three hours and you'll be ready to ride!
-----------


 
       
 
Specifications ST 120 RAW

Specifications

Dimensions:     
Estimated Dry Weight - Front (lbs/kg) 18.5 (8.4)  
Estimated Dry Weight - Rear (lbs/kg) 115.0 (52.2)  
Overall Length - pivot to bumper (in./cm.)   63.0 (160.0)  
     
Engine and Drivetrain:     
Chain Slider Standard   
Disc Brake Type Wilwood Hydraulic Single Piston  
Chain Case Chain EK520 SRX2 54 Link (continuous)  
Drive Chain EK520 SRX2 70 Link (master link)  
Drive Shaft Sprocket 17 tooth - splined  
Upper Chain Case Sprocket 17 tooth - splined  
Lower Chain Case Sprocket 17 tooth - splined  
     
Suspension:     
Rear Suspension Non-Pivoting Long Arm  
Front Track Shock RydeFX®  
Rear Track Shock RydeFX®  
Rear Travel - Fixed Fit Kit (in./cm) 12.0 (30.5)  
Ski Type   TS Backcountry - Tri Keel  
Rear Travel - TSS Fit Kit (in./cm) 20.0 (50.8)  
Skag Type   Hemispherical Carborized  
Track Width/Length/Height 12.5 x 120 x 2.5 Convex  
     
Features:     
Storage Mat Standard   
Graphics   Black/White  
Fuel Can   Accessory (3.5 gal / 13.2 L)  
Install Kit Options Fixed Strut/Suspension Strut  
Integrated Fuel Storage System Accessory   
Cargo Storage Accessory  
     
Installation  

Installation

Before You Start:
Your Timbersled Track System comes complete with full instructions that identify fit kit details and other details specific to your bike.
You will need to refer to full instructions when installing your kit.

Bike Tear Down:
  Front
Remove fork guards
Remove speed sensor (if applicable), and front brake system (leave master cylinder on the bars)
Remove front axle and tire

  Rear
Remove the rear master cylinder from the bike frame (leave connected to caliper)
Remove the upper shock bolt
Remove the drive chain
Remove the swing arm axle and remove the entire rear suspension and swing arm assembly (including wheel and brake system)

Spindle Install:
  Utilize supplied fitment chart to install the necessary spacers and reducers to the universal spindle
  Install spindle, using to stock front axle, to lower fork tubes, leave axle loose
  Mount fork clamps to fork tubes and position spindle per detailed instructions
  Tighten front axle and fork clamps
  Install ski onto spindle using supplied hardware

Track System Installation:
  Utilize supplied fitment chart to install the necessary spacers and reducers on to track kit
  Install Fixed Strut or Suspension Strut onto track kit
  Install track kit onto frame utilizing stock swing arm axle (Note: Suspension Strut install will require modifications to stock air box)
  Reinstall upper shock bolt thru Fixed Strut or Suspension Strut
  Install supplied drive chain and tension per instructions
  Route supplied brake line to front brake master cylinder and bleed the brake system