Free shipping Shopping cart Gift certificates
Fasst Co    Flexx Handlebars    Flexx Handguard Choices    Spoke Torque Wrenches
 
Flexx Handlebar Accessories 
 
Bar Pad
Flexx
Damper Crossbar
Flexx
Replacement
Elastomer Kit
Rebound
Elastomer Kit
Factory
Fresh Rebuild Kit
Flexx Debris Deflectors
from EE
Handguard Hitch
from BRP

 

    Availability Guide: If you order an item that is not in stock, we will not charge your card until the order is ready to ship.

      = Normally ships the same business day     = Ships in 4 to 10 business days    = Backordered from supplier
Replacement Flexx Bar Pad - RED
FA-1BPR
$19.99
 
Replacement Flexx Bar Pad - PINK
FA-1BPNK
$19.99
 
Damper Crossbar LONG - 10 inches
FA-1DCB
$34.99
 
Damper Crossbar SHORT - 9 inches
FA-1SDCB
$34.99
 
Flexx Handlebar Compression Elastomer Kits
BLACK - 98 Stiff
BLUE - 88 Soft
RED (in stock) - 95 Hard
YELLOW (in stock) - 92 Medium
Kit includes:  6 elastomers, 6 washers, and 6 replacement nuts.
FA-KitXX
$23.99
each
 

Rebound Elastomer Kit
Kit includes 2 soft rebound elastomers, 2 stiff rebound elastomers,
2-75mm bolts, 2 shim washers and 2 nuts.
(This kit is included with Flexx Bars after Jan. 2011)
FA-ReboundKit
$23.99
 
Factory Fresh Rebuild Kits
Gen 1 Flexx Bars - (Pre-August 2010 only)
Gen 2 Flexx Bars - (August 2010-March 2014)
Gen 3 Flexx Bars - (April 2014-Current)
FA-1RR
$24.99
$39.99
$39.99
 

  Flexx Handguard Accessories  Go to Item Page 
Flexx Handlebar System Handguard Hitch - Black
BRP M10 Flexx mount designed specifically to mount handguards to the Flexx Handlebar System.
FA-HGM100
 
Go to BRP
Handguard Hitch for
Flexx Bars
Flexx Debris Deflectors w/Mounting Hardware Silver
Aluminum Debris Deflector kit designed to fit Fasst Flexx Handlebars.
Comes with mount hardware, plastic shields sold separately (below).
EE-505140S
 
Go to EE
Debris Deflectors
for Flexx Bars
Outer Mount Shields
Available Colors:  Black, KTM Orange, Black /Orange, Yellow/Blue, Green/Silver,
YZ Blue, Honda Red, White, and Clear
Dimensions:  5 1/2" tall x 9 3/4" wide. No drilling required.
EE-5112x
 
Go to EE
Debris Deflector Shields
for Flexx Bars
Probend CRM Racer Pack for 10°-12° Flexx bars
Includes Alloy Handguards with Plastic Abrasion Guards, Plastic Shields,
Alloy Bar Ends, and mounting hardware.
Dimensions: 6 1/8" tall x 9 3/4" wide - No drilling required
CY-7700
 
Go to Cycra
Probend CRM Racer Pack
for Flexx Bars

Larger Images

Flexx Handlebar Accessories - Larger Images
Flexx Damper Crossbars - Arched crossbars for Flexx Handlebars built to accommodate steering dampers.
      Measure end-to-end distance to determine proper length needed.
Flexx Compression Elastomer Kit - Kit includes:  6 compression elastomers, 6 shim washers and 6 lock nuts.
      Most common setup:  Most riders prefer Yellow Compression Elastomers with Red Rebounds.
      OE Adjustments: The stock setting on the nut is 3 threads showing past the nut.
      Fine tuning tips:  Each elastomer is tunable on it’s own by going in or out with the nut.
      Fine tuning tips:  If you go in on the nut it will stiffen the bars, going out will make the bar more compliant.

Flexx Rebound Elastomer Kit
      Kit includes:  2 soft rebound elastomers, 2 stiff rebound elastomers, 2 75mm bolts, 2 shim washers, and 4 nuts.
Flexx Factory Fresh Kit
Gen 1 Factory Fresh kit:  Bars manufactured previous to August 2010 need periodic service of the pivot points, this kit provides you with all of the necessary parts to perform the service. The Gen 1 Factory Fresh Kit contains 4 c-clips, 16 o-rings, two bolts, two nuts, two washers.

Gen 2 Factory Fresh kit:  The Gen 2 Factory fresh kit is for bars made from August 2010 to March 2014. Typically this generation bar does not need the pivot points rebuilt, but we offer this kit for riders that would like to. The Gen 2 Factory Fresh kit contains 4 c-clips, 16 o-rings, two bolts, two nuts, two washers, 2 handle Fasst bushings and 4 center section Fasst bushings.

Gen 3 Factory Fresh kit:  The Gen 3 Factory fresh kit is for bars made from April 2014 and on. Typically this generation bar does not need the pivot points rebuilt, but we offer this kit for riders that would like to. The Gen 3 Factory Fresh kit contains 4 c-clips, 16 o-rings, two bolts, two nuts, two washers, 2 handle Fasst bushings and 4 center section Fasst bushings.