If you order an item that is not in stock, we will not charge your card until the order is ready to ship.
= Normally ships the same business day
= Special order, ships in 4 to 7 business days
= Backordered from supplier
PowerParts Tire / Wheel Tools
Add To Cart
Tire Lever Kit 17/27/32
Lightweight forged 7075 T-6 aluminum, 32mm axle wrench with special 17/27mm adapter with retention O-ring, 10/13mm rim lock wrench with a unique stepped
hex, tire spoon features an anti-pinch lip to prevent tube pinching, adapter allow Tire Levers to be used on both 27mm and 17mm front and rear axles, all in one set for changing tires on most KTMs.
The Bead Buddy acts as your third hand when fitting tires. Holds the tire in the tire bed, thereby making tire fitting much easier. Simply hook it into
the spokes and away you go. Particularly recommended for tire fitting with mousse.
Tire Iron Long
Practical tire iron – long version for minimum effort.
Tire Iron Small
This short version tire iron is ideal for your portable tool bag.
Tire Gauge Digital
Comfortable and easy to use. Fits all standard valves. Pressure display in bar or psi. Integrated pressure release valve
for accurate pressure adjustment. Switchable display and work area lighting. Energy-saving function with automatic cut-off. Maximum measuring pressure: 11 bar / 154 ps
KTM Tire Gauge
Easy to use! Measuring range 0 – 60 PSI. Clamping head rotatable through 90° on a flexible stainless steel feed line. The valve shaft is accessed easily and quickly. Very accurate measurements by
way of a durable internal membrane. Internal pressure is reduced after use by a relief valve (push button).
Foot Air Pump
Small, light and very portable. Mini foot pump with pressure gauge on the swiveling valve head that fits all prevalent
valves. Integrated double-cylinder with pressure switch-over to high pressure. Maximum 12 bar/160 psi.
Height: approx. 170mm folded together.
Spoke Torque Wrench - preset at 5.4 Nm
This spoke wrench, the torque is preset at 5.4 Nm. This prevents over-tightening of the spoke nipples. Too much torque when
tightening the spoke nipples is the most frequent cause of broken spokes. Wrench size 6.8 mm.
77212991100 (in stock) - 6mm and 7mm
00029020000 - 5mm and 5.6mm - Fits KTM 50/65 SX
Torque Wrench Set - Adjustable torque 2-25 NM
Push on spoke wrenches in sizes 5.65 and 6.95 mm, push-on ¼" ratchet,
and ratchet attachments: 8, 10, 13 mm socket wrench 15 Torx.
KTM Masterlink Tool
520 chain. Conveniently remove/install chain masterlink, without damaging the clip.
5/8 x 1/4 - For SX/XC/XC-W/EXC
Front and Rear Axle Pulls
KTM 125-530cc models, Husaberg all models 2009-14
EE-23055 / EE-23056
Go to Enduro Engineering
Front/Rear Axle Pull
Billet Chain Adjuster Blocks - Orange or Black
Designed to hold your offroad motorcycle wheel precisely in place while you
tighten your chain.
BO-CHADKTMOR / BO-CHADKTMBK
Go to Bolt Motorcycle Hardware
Chain Adjuster Blocks
Bead Buddy II
These make changing any tire easier and are a must for installing Bib Mousse tubes.
The Beady Buddy II pushes the tire bead down into the center of the rim to take the pressure off the bead without damaging your rim.
Go to Motion Pro Tire Tools
Spoke Torque Wrench Set / Adjustable Spoke Torque Wrench Set
Includes 11 wrench heads, spline drive, and storage case.
Go to Fasst Co
Spoke Torque Wrenches
BeadPro Tire Bead Breaker and Lever Tool Set
Compact and lightweight tool that makes it a breeze to break tire beads and change tires.