CNC Brake Caliper Support with Brake Disc Guard 20mm Axle
78913975144 - Fits KTM 125/150 SX, 250/350/450 SX-F,
450 SX-F Factory Edition 2013-18, 250 SX-F Factory Edition 2015-18
---------------------------------------------------------------------------
78113975244 - Fits KTM SX/XC/XC-W/EXC 2004-18
The integrated brake disc guard protects the rear brake disc from roost and other solid objects. The brake caliper support is lighter and stiffer than the standard version. The stiffness has a positive effect on braking power and application. CNC-machined from highest grade aluminum and anodized black and orange. Options available: Carbon brake caliper protection part# 77713975120, below.

Carbon Brake Caliper Protection - 77713975120
Complete and lightweight rear brake caliper coverage. Optimum protection against roost. Can be used with CNC brake caliper supports 7771397501030, 78113975044, 78113975144 and 78913975144 (sold separately).

Left Hand Brake Kit - 78113900100
Fits KTM 250 SX 2004-18, 250/300 XC/XC-W 2004-18, 250 XCF-W 2007-18, 350 XCF-W 2013-18, 450 SX-F 2016-18, 450 XCF-W 2008-18
For use with the automatic clutch. Allows braking of the rear wheel with the left hand, hence providing additional control in critical situations (e.g. steep downhills and right hand turns).
Instructions

CNC Brake Caliper Support - 7771397511030
Fits KTM SX/XC 2013-18
Lighter and stiffer than the standard brake caliper support. The stiffness has a positive effect on such braking properties as braking power and application.
CNC-machined from highest grade aluminum and black anodized. Options available: Carbon fiber brake caliper protection 77713975020 and carbon fiber brake disc protection 77713975030.

Brake Caliper Support - 77013914000
Fits KTM SX/XC 2009-18, XC-W/EXC 2010-18
Required for using the 320mm brake front disc part# 58309060000 when fitting with the standard 2-piston Brembo® brake caliper.
Instructions

Rear Brake Disc Guard - Black
U6913130 - Fits KTM SX/XC 2013-17
U6907872 - Fits KTM SX/XC 2004-12, XC-W/EXC 2004-15 (in stock)
High quality billet aluminum part with a replaceable lower fin. Helps protect your rear brake disc from damaged caused by rocks and debris. Replaces the stock brake caliper carrier. (Replacement Fin U6909881, below)

Image
Not
Available

Rear Brake Disc Guard - Orange or Black
5481096120004 - Orange - Fits KTM SX/XC/XC-W/EXC 2004-18
5481096120030 - Black - Fits KTM SX/XC/XC-W/EXC 2004-18
Protects the rear brake disc from stones and other solid objects in the event of a crash. Made of high-strength aluminum.

Front Brake Disc Guard (Up to 260mm Brake Disc) - 7900996100030
Fits KTM SX/XC 2015-18, XC-W/EXC 2016-18
Light weight and innovative. The intelligent fitting system with a central adapter replaces the spacer sleeve on the wheel axle and allows the tire to be changed, brake to be serviced, etc., without removing the brake cover.
Instructions

Front Brake Disc Guard (Up to 260mm Brake Disc) - 7800906110030
Fits KTM SX/XC 2004-14, XC-W/EXC 2004-15 (will not fit 2016 and newer)
Light weight and innovative. The intelligent fitting system with a central adapter replaces the spacer sleeve on the wheel axle and allows the tire to be changed, brake to be serviced, etc., without removing the brake cover.
Instructions

Brake Bleeder Screw
78013920000 - Fits KTM SX/XC 2009-18, XC-W/EXC 2010-18
77013920000 - Fits KTM SX/XC 2004-08, XC-W/EXC 2004-09
Bleeding the brakes or changing the brake fluid is completed in a matter of seconds, even on your own: First replace the original bleeder screw on the brake caliper with this new bleeder screw equipped with a check valve. When changing the brake fluid or bleeding the system, simply release the screw on the check valve by a half turn and pump the brake fluid through the system with the brake lever.  The valve prevents air from forcing its way back into the system on releasing the brake lever. Supplied with an anodized dust cap.

Rear Brake Reservoir Extender - 54813960050
Fits KTM SX/XC/XC-W/EXC 2004-17
This rear brake reservoir cap has a larger volume and additional cooling fins. This helps cool the brake fluid and helps control fading in extreme conditions.