Go to Free Shipping Info

 

    BIKE ACCESSORIES
 Bike Stands
 Body Kits
 Bolt Kits
 Cargo Racks
 Digital Gauges
 Fender Packs
 Footpegs
 Gas Tanks
 Kickstands
 Motorcycle Luggage
 Seats
 Lift Straps
    DRIVE / BRAKES
 Rekluse Clutches
 Chain Adjusters
 Brake Discs
 Brake Pads
 Chains
 Left Hand Rear Brakes
 Sprockets
    ELECTRICAL
 Batteries
 Battery Chargers
 Dual Sport Kits
 Lighting Kits - KTM
 Led Lights
 Switches
 Turn signals
    ENGINE
 Air Filters
 Rekluse Clutches
 Jetting Kits
 Fuel Filters
 Fuel Injection Tuners
 Oil Filters
 Valve Shim Kits
    EXHAUST
 Spark Arrestor Endcaps
 Header Pipes
 Heat Shields - KTM
 Mufflers / Silencers
 Pipeguards
    HANDLEBAR CONTROLS
 Bar End Mounts
 Deflectors
 Grip Heaters
 Grips
 Handguards
 Left Hand Rear Brakes
 Levers
 Mirrors
 Steering Stabilizers
 Switches
 Throttle Cables
 Throttle Cam Systems
    PROTECTION
 Clutch Slave Cylinder
 Disc Guards
 Handguards
 Pipe Guards
 Radiator Guards
 Skid Plates
    RIDER GEAR
 Basegear
 Boots
 Drink Systems
 Fanny Packs
 Gloves
 Helmets
 Jackets
 Jerseys
 Pants
    SUSPENSION
 Fork Seal Doctor
 Fork Seal Protectors
 Seals / Bearings
 Steering Stabilizers
    TOOLS
 Motion Pro Tools
 Pocket Chainsaw
 Rim Locks
 Spoke Torque Wrench
 TiProlight Wrenches
 Tire / Chain Tools
 Tire Changing Stand
 Tire Levers
 Tool Packs

Authorized Dealer for:



Go to BlueRibbon Coalition Website
 
Go to 2018 KTM Offroad Motorcycle Pages
Go to CycleBuy KTM Husqvarna New Motorcycle Showroom Page


Call us at 888-284-4588 or 541-928-3390 to see what kind of deal we can put together for you.
   MSRP prices do not include destination charge, pre-delivery set-up, state or local, title, registration, and license fees.
 
 
2018 KTM 150 XC-W  ‘XC’ means cross-country. ‘W’ represents its wide-ratio transmission. ‘KTM’ stands for winning. This model is a READY TO RACE bike built for closed-course enduro racing. With the agility of a 125 and enough muscle to take the fight to the 250 cc 4-Strokes, this bike punches well above its weight. Updated WP Xplor Suspension, a lightweight chromoly steel frame and a super-compact electric-start 144 cc engine mean nothing short of a dominating performance in the tightest of situations. That’s why when the
going gets tough, the tough get an XC-W.

Highlights

2018 KTM 150 XC-W
  UPDATED 38mm Mikuni TMX carburetor with new settings and a new angle (turned 7°) for better controllable power with reduced fuel overflow. It is also less sensitive to altitude and temperature changes.
  UPDATED WP Xplor 48 upside-down split front fork with new outer tubes for more sensitivity, less stiction and reduced weight. Revised settings are stiffer as well.
  UPDATED WP Xplor PDS rear suspension features stiffer settings while still offering.
the progressive feel and excellent bottoming resistance only PDS can provide.
  NEW CDI control unit for improved starting. Ignition curves remain unchanged.
  NEW radiator guards provide better airflow in muddy conditions.
  143.99 cc engine features a compact shaft arrangement for better mass centralization.
  6-speed wide ratio transmission developed for enduro racing.
  Brembo operated hydraulic clutch has excellent modulation and is reliable for tough duty.
  Lightweight Chromoly steel frame provides high torsional rigidity with less longitudinal stiffness resulting in excellent handling and energy absorption.
  Shock mounting geometry is matched to the new swingarm with a more centered location for nearly symmetrical loads to the swing arm.
  Forged aluminum triple clamp with handlebar positions and a 22mm offset for precise handling.
  Throttle assembly with easy free play adjustment similar to the 4-strokes featuring exchangeable throttle cams for different opening characteristics of the throttle.
  ODI grips that feature a lock-on design for the left grip and a vulcanized grip on the throttle side.
  “No Dirt” footpeg design keeps the pegs pivot from becoming clogged, ensuring the footpeg is always in the correct position.
  CNC machined hubs, high-end Giant rims and Dunlop GEOMAX AT81 tires for maximum strength and traction.
  Airbox and filter design provides maximum performance with fast “no tools” air filter changes.
  Bodywork with perfect ergonomics and contact points for maximum control and comfort.
  Cooling system features stiffer radiators with better cooling efficiency while new radiator guards provide crash protection.
  2.6 gallon see-through polyethylene tank provides the range needed from a true READY TO RACE enduro bike.
  “No Dirt” shift lever prevents dirt from fouling the lever joint to ensure proper shifting in any condition.
 

Technical Specs

  Engine Type: Single Cylinder, 2-Stroke
  Displacement: 143.99 cc
  Bore/Stroke: 58/54.5 mm
  Starter: Electric, Lithium Ion 12 V 2 Ah / Kickstarter
  Transmission: 6 Gears, Wide Ratio
  Fuel System: Mikuni TMX 38 Carburetor
  Lubrication: Premix 60:1
  Primary Ratio: 23:73
  Final Drive: 13:50
  Cooling: Liquid Cooling
  Clutch: Wet Multi-Disc Clutch, Brembo Hydraulics
  Ignition: Kokusan
  Frame: Central Double-Cradle Type 25CrMo4 Steel
  Subframe: Aluminum
  Handlebar: Neken, Aluminum Ø 28/22mm
  Front Suspension: WP Xplor USD Ø 48mm
  Rear Suspension: WP Xplor PDS Monoshock
  Suspension Travel Front / Rear: 300 mm / 11.8 in; 310 mm / 12.2 in.
  Front/Rear Brakes: Disc Brake 260 mm; 220 mm
  Front/Rear Rims: 1.60 x 21” / 2.15 x 18” Giant
  Front/Rear Tires: 80/100-21” / 110/100-18” Dunlop GEOMAX AT81
  Chain: 5/8 x 1/4 in.
  Silencer: Aluminum
  Steering Head Angle: 26.5º
  Triple Clamp Offset: 22 mm
  Wheelbase: 1,471mm ± 10 mm / 57.9 ± 0.4 in.
  Ground Clearance: 370mm / 14.6 in
  Seat Height: 960 mm / 37.8 in
  Tank Capacity, Approx: 10 l / 2.6 gal.
  Weight (without fuel), Approx: 91.5 kg / 201.7 lbs.
 

Features and Benefits

Engine  The KTM 150 XC-W engine is the most powerful and most competitive engine in its class, providing precisely the kind of power an Enduro rider wants. This 150cc ripper has been developed with the latest KTM engineering know-how and the most advanced technology available. The results: whopping power and mountain conquering torque across the entire rev range, while being extremely compact and light.
 
Cylinder and Cylinder Head  This compact cylinder with a 58 mm bore features a cutting-edge power valve unit with a sophisticated mechanism for the lateral support exhaust ports. Matched to a twin-component cylinder head, it is KTM’s secret to all-round grunt. The layout of the cylinder and head water jackets guarantee efficient heat dissipation when you’re riding at your limit.
 
Crankcases  Lightweight, die-cast crankcases featuring a high crankshaft and clutch shaft position, located close to the center of gravity, which results in optimal mass centralization and outstanding rideability. In addition, the engine body is extremely lightweight and compact, while still able to house an E-starter. And because looks matter, the engine covers feature an advanced surface structure in order to reduce the wear caused by the rider´s boots.
 
Transmission A wide-ratio 6-speed enduro transmission was designed specifically for the small 2-stroke enduro engine, its gear ratios perfectly in sync with the 150 XC-W’s power band. The latest production technologies allow for compact dimensions and minimal weight. An advanced ´No Dirt´ gear lever design prevents mud or dirt build-up in the joint. Because even dirt lovers hate mud when it’s in the wrong places.
 
Carburetor The KTM 150 XC-W is fitted with a MIKUNI TMX carburetor. This 38mm flat slide carb lives to provide smooth and controllable power all the way up to the rev limitation. With a new intake manifold the carburetor is turned 7° to reduce the overflow of fuel. And it’s less sensitive to different altitudes and temperatures, so you can pin it wherever, whenever.
 
Clutch The clutch is activated by a hydraulic system made by Brembo. This reliable and self-adjusting unit guarantees light operation and highly controllable modulation.
 
Exhaust System The engineers meticulously tuned the pipe for maximum power, so this little screamer is as tough as it is strong.
 
Ignition All 2-stroke models feature a new CDI control unit with an advanced hardware which improves the starting behavior of the engine. The ignition curves remain unchanged.
 
Piston The 150 XC-W’s piston is optimized for maximal reliability and the shape fits brilliantly to the cylinder layout.
 
Crankshaft A reliable piece of engineering that has been skillfully balanced to guarantee minimal vibrations. It allows a decrease of the displacement to 125cc just by replacing cylinder, piston and head. There’s no more need to change the crankshaft. Two-in-one in no time.
 
Featherweight  KTM engineers just love shedding weight. The result: the current KTM XC-W’s are the slimmest, lightest bikes in the Enduro scene.
 
Frame  The high-tech, lightweight chrome-moly steel frame has a knack for easy handling, outlandish rideability, precise cornering and excellent stability. You can also count on high torsional rigidity and low longitudinal stiffness. This results in better absorption of the energy created from the front and rear suspension sucking up jumps and bumps. In short: more comfort and less rider fatigue. Laterally attached, lightweight engine head stays (the connection between cylinder head and frame) contribute to a reduced vibration level. Two threaded inserts in the lower cradle tubes allow for safe fixation of an optional skid plate. The engineers were able to pull off all that, while making the frame two pounds lighter than that of the lightest competitor on the market. In addition, the frame is easier to maintain, easier to work on and supplies more space for the tank and other components. The bike also features an extra-light aluminum subframe, which weighs in at less than 2 pounds.
 
Swingarm  This design allows for an optimized mounting position of the PDS shock absorber, providing more progressive action. Furthermore, the cast aluminum design guarantees low weight and a perfect flex behavior. The single-component casting process also eliminates any inconsistencies and inherent weak points created by welding. And it’s better looking
 
Footpegs  Sophisticated “No Dirt” footpegs prevent smudging up the pegs, even when digging in deep ruts. The pegs on the EXC models are 6mm higher than the ones used on SX models, which benefits ground clearance. But you can swap them at will.
 
Front Suspension The WP Xplor 48 upside-down fork is a split fork developed by WP in close collaboration with KTM. It is fitted with a spring on both sides but features separated functions for each fork leg: compression damping is fitted on the left side, while rebound is on the right. The forks can easily be adjusted for compression and rebound with the twist of a dial on the top of the forks. New outer fork tubes and a reworked setting make for more sensitivity, improved damping behavior and a reduced weight. In addition, a sealed hydro-stop guarantees excellent resistance to bottoming-out. Due to high-quality materials and a state-of-the-art production process, the new WP Xplor 48 fork – with approx. 300mm of travel – has outstanding response and damping characteristics. A comfortable preload adjuster can be retrofitted and allows for a simple spring preload setting in three steps without tools (standard, +3mm, +6mm).
 
Rear Suspension The WP Xplor PDS is a newly developed shock absorber. The PDS is a KTM trademark design where the shock absorber is directly connected to the upper side of the swingarm. This setup boasts the best possible mounting geometry and provides amazingly progressive damping. The shock absorber is mounted close to the centerline, which means nearly symmetrical loads for the swingarm and frame and more space for the exhaust system. A second piston works together with a closed cup (instead of a needle) towards the end of the stroke and is supported by a progressive shock spring for exceptional bottoming resistance. Various machined and anodized components and a distinctive WP color trim make this a valuable, high-end product compared to the less refined shock absorbers of the competition.
 
Triple Clamp  The XC-Ws are fitted with forged triple clamps with an offset of 22mm, ensuring a solid grip of the fork and precise handling. The handlebar is adjustable forwards and backwards over 4 positions, so the XC-W will fit you like your favorite gloves.
 
Brakes  You can’t brake any harder, better, faster or stronger. High-tech Brembo calipers are combined with lightweight Wave brake discs. The steel-flex front brake hose has efficient protection and there’s an integrated channel for the speedometer cable. First you outrun them, then you outbrake them.
 
Handlebar  KTM engineers know how to handle handlebars. This tapered unit, made of high-strength aluminum by NEKEN, features a throttle assembly with a robust aluminum body and easy free-play adjustment. An ODI vulcanized grip sits on the right, while on the left side of the bar a comfortable ODI lock-on grip requires no glue or wire to secure it.
 
E-Starter  The design of the 150cc engine offers a home to the best perk in the dirt bike world: an E-starter powered by a reliable lithium ion battery. This magic button´s benefits are clear, especially for those of you looking to compete on an extreme level.
 
Air Filter Box  The air filter box design offers maximum protection of the air filter against soiling, while ensuring maximum airflow in a quiet way. The large Twin Air filter is mounted in a stiff cage, which at the same time holds the system in place. This design is so simple, you could still pop a fresh one in with a face full of mud. Without tools. In seconds.
 
Fuel Tank  A lightweight polyethylene tank with a capacity of 10 liters. You will always be able to see how much fuel there’s left at a glance, thanks to the see-through plastic. By pushing the orange release button in the center of the fuel tank cap, the bayonet mechanism makes refueling quick and easy.
 
Wheels  The XC-W wheels feature lightweight, CNC machined hubs and high-end Giant rims guaranteeing maximum stability at minimum weight. The wheels are fitted with the latest Dunlop tires. Take them wherever you like, traction will be waiting.
 
Cooling System  KTM’s proven cooling system routes the coolant from the cylinder head through the frame triangle, directly to aluminum radiators made by WP. Thanks to flow optimized internal circulation and CFD-calculated ventilation, the system is superbly efficient. In addition, new radiator protections improve heat dissipation. Especially in the mud. They are also integrated into the front part of the shrouds to protect the radiators in a crash.
 
Battery and Wiring Harness  These engines are fitted with KTM’s proven E-starter – a unique KTM feature and a major benefit at all levels of motocross racing. A super compact lithium ion battery breathes life into the engine, while offering three times the starting energy of a conventional battery. The battery and wiring harness are centralized in a compartment above the air filter box, allowing the mechanic to remove the subframe without getting in conflict with the electrics. A happy mechanic, is a good mechanic.
 
Bodywork  KTM R and D, KISKA Design and the factory racers had their say in shaping the plastics with one goal: complete harmony between rider and bike. Perfect ergonomics and contact points provide maximum comfort in movement on the XC-W. The I-beam structures of the front and rear fenders guarantee maximum stability and a low weight thanks to well thought-out construction and mounting. They also stay cleaner for longer. Clever brake hose routing on the front number plate prevents wear and tear.
 
Graphics  New graphics convey the READY TO RACE character of the 2018 KTM XC-W model line.
 
 
 

       SHOP BY BRANDS
Go to Acerbis Products
Go to All Balls Racing
Go to Alpinestars offroad and motocross Boots Page
Go to ARC Composite Levers
Go to Micro-Start Power Supply Kit
Go to Arai Helmets
Go to Battery Tender products
Go to BikeMaster Products
Go to Bolt Motorcycle Hardware Products
Go to BRP Page
Go to Bullet Proof Designs
Go to Clarke Manufacturing Gas Tanks Products
Go to CV4 Cooling Products
Go to Cycra Racing Products
Go to DID Racing Chains
Go to Dirt Tricks Products
Go to EBC Brakes
Go to ELine Skid Plates
Go to Enduro Engineering Products
Go to Fasst Company Products
Go to Fastway Products
Go to FMF Products
Go to Flatland Racing Products
Go to G2 Ergonomics Products
Go to Giant Loop Motorcycle Luggage
Go to Hammerhead Products
Go to Heat Demon Handlebar Grip warmers
Go to HiFlo Oil Filters
Go to HotCams Products
Go to IMS Gas Tanks
Go to Ironman Sprockets Products
Go to JD Jetting Products
Go to JT Sprockets
Go to Klim Technical Riding Gear Products
Go to Leatt-Brace Products
Go to Moose Racing Products
Go to Motion Pro Tools
Go to No-Toil Products
Go to Ogio Hydration Back Packs, Flight Vest, Toolbag, and Accessories
Go to Ohlins Steering Stabilizers
Go to Pivot Works Seals and Bearings
Go to Pocket ChainSaw - The World's Fastest Cutting Pocket Saw
Go to Pro Moto Billet Products
Go to ProTaper Grips
Go to Ram Mounts
Go to Rekluse Products
Go to Renthal Sprockets and Chains
Go to Scotts Performance Page
Go to Seat Concepts - Complete Seats and Comfort Seat foam and Cover
Go to Shock Sox Removable Fork Seal Protector
Go to Shorai Batteries
Go to Trail Tech Products
Go to Tubliss Products page
Go to Tugger Products

 
 
 
          © 1998 - 2017 CycleBuy.com, All rights reserved. / Order Policies / Privacy Policy
Unauthorized use of any images, descriptions, or editorial content without permission is strictly prohibited.
Address:  1116 S Commercial Way SE, Albany, Oregon 97322 U.S.A.