Go to Free Shipping Info

 

    BIKE ACCESSORIES
 Bike Stands
 Body Kits
 Bolt Kits
 Cargo Racks
 Digital Gauges
 Fender Packs
 Footpegs
 Gas Tanks
 Kickstands
 Motorcycle Luggage
 Seats
 Lift Straps
    DRIVE / BRAKES
 Rekluse Clutches
 Chain Adjusters
 Brake Discs
 Brake Pads
 Chains
 Left Hand Rear Brakes
 Sprockets
    ELECTRICAL
 Batteries
 Battery Chargers
 Dual Sport Kits
 Lighting Kits - KTM
 Led Lights
 Switches
 Turn signals
    ENGINE
 Air Filters
 Rekluse Clutches
 Jetting Kits
 Fuel Filters
 Fuel Injection Tuners
 Oil Filters
 Valve Shim Kits
    EXHAUST
 Spark Arrestor Endcaps
 Header Pipes
 Heat Shields - KTM
 Mufflers / Silencers
 Pipeguards
    HANDLEBAR CONTROLS
 Bar End Mounts
 Deflectors
 Grip Heaters
 Grips
 Handguards
 Left Hand Rear Brakes
 Levers
 Mirrors
 Steering Stabilizers
 Switches
 Throttle Cables
 Throttle Cam Systems
    PROTECTION
 Clutch Slave Cylinder
 Disc Guards
 Handguards
 Pipe Guards
 Radiator Guards
 Skid Plates
    RIDER GEAR
 Basegear
 Boots
 Drink Systems
 Fanny Packs
 Gloves
 Helmets
 Jackets
 Jerseys
 Pants
    SUSPENSION
 Fork Seal Doctor
 Fork Seal Protectors
 Seals / Bearings
 Steering Stabilizers
    TOOLS
 Motion Pro Tools
 Pocket Chainsaw
 Rim Locks
 Spoke Torque Wrench
 TiProlight Wrenches
 Tire / Chain Tools
 Tire Changing Stand
 Tire Levers
 Tool Packs

Authorized Dealer for:



Go to BlueRibbon Coalition Website
 
Go to CycleBuy KTM Husqvarna Current Inventory Page
 
>>>2016 MODELS ARE ALL SOLD OUT<<<
 
2016 KTM 500 XC-W  The 500 XC-W is one of the most powerful enduro machines of its class. Combining low weight and high displacement, high-tech SOHC 4-stroke technology is the right choice for all who are looking for maximum performance, combined with playful handling.

Airbox  The air filter can be quickly replaced without the use of any tools, thanks to an ingenious airbox design guarantees optimum filter protection from flying dirt while creating maximum airflow for high performance. The airbox covers are manufactured in a 2-component process with in-mold graphics. In addition, two extra flaps on the left cover allow it to be secured with bolts if desired.
 
Bodywork  The bodywork has been designed ergonomically and functionally in such a way that the whole motorcycle is in perfect harmony with the rider down to the very last detail.
 
Fuel Tank  The large capacity fuel tank is constructed of lightweight polyethylene and specifically designed for off-road use. A -turn bayonet filler cap features a release mechanism for quick and easy refueling.
 
Speedo  The speedometer by MAE integrates all the warning and indicator lights, except the turn signals, in a single unit. This gives the cockpit a clean and minimal look, with clear and readily available information.
 
Graphics  New graphics with clear lines visually underscore the exacting standards of what KTM deems a true, cutting-edge off-road bike.
 
Handlebar  All XC-W models are fitted with super strong, tapered Neken handlebars made of high tensile aluminum alloy that can be mounted in four positions. Standard equipment hand guards made of a new 2-component polymer for durability and effective hand protection.
 
Cooling System  The proven integrated KTM cooling system routes the coolant from the cylinder head through the frame triangle directly to the WP aluminum radiators. A radiator fan is standard equipment for the big displacement 500 XC-W.
 
Frame  The modern frame design of the 500 XC-W, comprising lightweight, high strength, chrome-molybdenum steel section tubes, combines maximum longitudinal stiffness with optimum torsional stiffness. This guarantees easy handling and precise steering behavior, as well as excellent ride stability. It clearly represents the benchmark in terms of weight and stability. Thanks to the frame design and the rear PDS damping system, impacts at the rear wheel are absorbed and dissipated optimally. For 2016 the frame is protected by a new, robust skidplate.
 
Suspension/Damping  The KTM 500 XC-W is fitted with a new front fork featuring newly designed fork boots with shorter offset, increased trail and a new suspension settings, optimally tuned to weight and engine. In addition, the fork features new fork guards allowing for easier cleaning. At the rear, a PDS shock absorber from WP Suspension works with a direct linkage to the upper side of the swingarm. A wide range of setting options for rebound damping and high- and low-speed compression damping are standard and can be adjusted to suit racing and trail conditions.
 
Swingarm  The cast aluminum swingarm has been developed with state-of-the-art calculation and simulation software and constructed for minimum weight, optimum stiffness and precisely defined flexibility.
 
Triple Clamps  The high-end CNC machined triple clamps have been specifically designed for off-road use and ensures precise handling thanks to precision clamping of the fork legs. The rider receives precise feedback from the front wheel, even in the toughest terrain, thereby increasing riding safety and speed.
 
Counter Balancer  In order to balance and smooth engine vibrations, the engine uses a counter balance shaft, which doubles as a water pump drive.
 
DDS Clutch  The one-piece basket of the DDS clutch (damped diaphragm steel) is machined from solid high-tensile steel in one solid part together with the primary drive gear. This process guarantees unbeatable reliability and, together with the thin steel linings, contributes to the narrow engine width due to a compact rivet-less design. The diaphragm spring makes it possible to implement an additional rubber damping system inside the clutch hub, ensuring reliability for the transmission and excellent traction. Finally, the hydraulic clutch mechanism by Brembo in conjunction with the diaphragm spring provides a very light clutch operation and controllable modulation.
 
Crankshaft  The crankshaft and ultra-lightweight connecting rod are made by Pankl from special high-tensile strength steel. The crankshaft employs a plain big end bearing, and two force-fitted bearing shells run directly on the crank pin. The necessary oil feed for this bearing is ensured by the engine's pressure lubrication. This design increases the engine's long-term durability, and lengthens crankshaft service intervals, which is a customer benefit in terms of time, effort and cost.
 
Cylinder Head  A single overhead camshaft activates two titanium intake valves and two steel exhaust valves. The weight-optimized valve train has low friction for improved performance as well as low engine braking action.
 
Engine  Developed for tough off-road duty, the SOHC engine with 510.4cc is distinguished by an extremely compact design, easy maintenance and excellent durability at a minimal weight. Together with the Keihin EFI system, this provides unrivalled enduro specific performance and rideability.
 
Engine Management System  The Engine Management System by Keihin with electronic fuel injection via a 42mm throttle body ensures a snappy response and maximum engine performance. An oil-cooled 196 W alternator provides sufficient energy for the fuel injection, lighting and other electrical loads. With an optional map-select switch from the Power Parts program, the EMS can allow the rider to select different engine characteristics. In addition, the optional User-Setting-Tool provides the ability to readout engine data with a laptop and change the ignition and injection mapping with just a few mouse clicks.
 
Piston  The lightweight, forged bridged box-type piston shares its high performance piston rings with the 450 SX-F.
 
Starter  The 500 XC-W is equipped with a kickstarter as well as electric starter as standard. The electric starter is well protected behind the cylinder.
 
Transmission  The proven 6-speed gearbox is distinguished by easy and precise shifting.
 
Brakes  High-tech Brembo brakes have always been standard equipment on KTM off-road bikes, and combined with the lightweight Galfer Wave discs, they are the ultimate solution in braking technology. Being the class-leading brakes in off-road, they are unchanged for 2016.
 
Front Axle  The front axle has been reduced in size from 26mm to 22mm to reduce weight and offer better front end feel. The adjusted offset from 35mm to 33mm increases trail and provides more stability.
 
Front Fork Guards  The fork protectors have been adapted to the fork shoes and are also lighter. The open design offers the same level of protection while giving easier access to the fork legs for quicker cleaning and faster maintenance.
 
Wheels  The black colored aluminum Giant rims with black spokes are mated to CNC machined hubs and lightweight aluminum nipples to achieve maximum stability at minimum weight. These high quality, lightweight black rims have been developed for KTM and offer top performance when fitted with the new Dunlop GEOMAX AT81 tires on all XC-W models.
 
 
 

                                                              

       SHOP BY BRANDS
Go to Acerbis Products
Go to All Balls Racing
Go to Alpinestars offroad and motocross Boots Page
Go to ARC Composite Levers
Go to Micro-Start Power Supply Kit
Go to Arai Helmets
Go to Battery Tender products
Go to BikeMaster Products
Go to Bolt Motorcycle Hardware Products
Go to BRP Page
Go to Bullet Proof Designs
Go to Clarke Manufacturing Gas Tanks Products
Go to CV4 Cooling Products
Go to Cycra Racing Products
Go to DID Racing Chains
Go to Dirt Tricks Products
Go to EBC Brakes
Go to ELine Skid Plates
Go to Enduro Engineering Products
Go to Fasst Company Products
Go to Fastway Products
Go to FMF Products
Go to Flatland Racing Products
Go to G2 Ergonomics Products
Go to Giant Loop Motorcycle Luggage
Go to Hammerhead Products
Go to Heat Demon Handlebar Grip warmers
Go to HiFlo Oil Filters
Go to HotCams Products
Go to IMS Gas Tanks
Go to Ironman Sprockets Products
Go to JD Jetting Products
Go to JT Sprockets
Go to Klim Technical Riding Gear Products
Go to Leatt-Brace Products
Go to Moose Racing Products
Go to Motion Pro Tools
Go to No-Toil Products
Go to Ogio Hydration Back Packs, Flight Vest, Toolbag, and Accessories
Go to Ohlins Steering Stabilizers
Go to Pivot Works Seals and Bearings
Go to Pocket ChainSaw - The World's Fastest Cutting Pocket Saw
Go to Pro Moto Billet Products
Go to ProTaper Grips
Go to Ram Mounts
Go to Rekluse Products
Go to Renthal Sprockets and Chains
Go to Scotts Performance Page
Go to Seat Concepts - Complete Seats and Comfort Seat foam and Cover
Go to Shock Sox Removable Fork Seal Protector
Go to Shorai Batteries
Go to Trail Tech Products
Go to Tubliss Products page
Go to Tugger Products

 
 
 
          1998 - 2017 CycleBuy.com, All rights reserved. / Order Policies / Privacy Policy
Unauthorized use of any images, descriptions, or editorial content without permission is strictly prohibited.
Address:  1116 S Commercial Way SE, Albany, Oregon 97322 U.S.A.