Go to Free Shipping Info

 

    BIKE ACCESSORIES
 Bike Stands
 Body Kits
 Bolt Kits
 Cargo Racks
 Digital Gauges
 Fender Packs
 Footpegs
 Gas Tanks
 Kickstands
 Motorcycle Luggage
 Seats
 Lift Straps
    DRIVE / BRAKES
 Rekluse Clutches
 Chain Adjusters
 Brake Discs
 Brake Pads
 Chains
 Left Hand Rear Brakes
 Sprockets
    ELECTRICAL
 Batteries
 Battery Chargers
 Dual Sport Kits
 Lighting Kits - KTM
 Led Lights
 Switches
 Turn signals
    ENGINE
 Air Filters
 Rekluse Clutches
 Jetting Kits
 Fuel Filters
 Fuel Injection Tuners
 Oil Filters
 Valve Shim Kits
    EXHAUST
 Spark Arrestor Endcaps
 Header Pipes
 Heat Shields - KTM
 Mufflers / Silencers
 Pipeguards
    HANDLEBAR CONTROLS
 Bar End Mounts
 Deflectors
 Grip Heaters
 Grips
 Handguards
 Left Hand Rear Brakes
 Levers
 Mirrors
 Steering Stabilizers
 Switches
 Throttle Cables
 Throttle Cam Systems
    PROTECTION
 Clutch Slave Cylinder
 Disc Guards
 Handguards
 Pipe Guards
 Radiator Guards
 Skid Plates
    RIDER GEAR
 Basegear
 Boots
 Drink Systems
 Fanny Packs
 Gloves
 Helmets
 Jackets
 Jerseys
 Pants
    SUSPENSION
 Fork Seal Doctor
 Fork Seal Protectors
 Seals / Bearings
 Steering Stabilizers
    TOOLS
 Motion Pro Tools
 Pocket Chainsaw
 Rim Locks
 Spoke Torque Wrench
 TiProlight Wrenches
 Tire / Chain Tools
 Tire Changing Stand
 Tire Levers
 Tool Packs

Authorized Dealer for:



Go to BlueRibbon Coalition Website
 
Go to CycleBuy KTM Husqvarna Current Inventory Page
 
>>>2015 MODELS ARE ALL SOLD OUT<<<
 
2016 KTM 125 SX  The high performing and well-proven KTM 125 SX has been on the market at the front of the field for years. For MY 2016 this bike is even better. Powered by lighter and all-new high performance 2-stroke engine, with a power valve and 6-speed gearbox fitted in a new state-of-the-art chassis, the 125 SX remains a favorite among young champions. Once again this lower capacity 2-stroke machine will set a new benchmark in the 125 cm class.

Cylinder  Within the heart of the new engine is a newly designed cylinder with reworked ports and a newly developed power valve unit with a sophisticated mechanism for the lateral support exhaust ports. Together with a new two-component cylinder head, a massive performance increase over the entire range has been achieved. Even though it is 0.8 lb lighter and more compact than the previous model, the new layout of the water jackets in the cylinder and head guarantee a better heat dissipation, keeping the 125 SX cool under the most extreme conditions.
 
Die-Cast Engine Cases  For the latest 2-Stroke engine generation the KTM engineers designed all new die-cast engine cases featuring a 27 mm higher clutch shaft and 37 mm higher crankshaft position, which results in better mass centralization for improved rideability. In addition, the engine itself is much more compact and this contributes massively to the weight reduction of 1.3 lbs.
 
Piston  The new 125 SX piston is optimized for maximal reliability and the reworked shape fits perfectly to the new cylinder layout.
 
Exhaust  For the new model our engineers developed a new, specifically tuned exhaust pipe in order to get the maximum power output of the engine.
 
Transmission  A new 6-speed transmission provides the same gear ratios as the previous model, but due to the latest production technologies the width could be reduced by 6 mm and the weight reduced by 200 g. An advanced "NO-DIRT" gear lever design prevents dirt from blocking the joint of the lever guaranteeing safe activation of the transmission.
 
New Crankshaft  The new crankshaft provides the same stroke of 54.5 mm as in the past, but it features an optimized balancing for minimum vibration while being 50 g lighter.
 
Clutch  The new engine features a new hydraulic clutch mechanism made by Brembo instead of Magura. It ensures an easy clutch action and well-defined modulation.
 
Engine  The newly developed 125 cc engine for 2016 features a completely new architecture with the latest KTM engineering know-how and the most advanced technology in the class. The result of all of this is that it produces better power over the entire rev range, is 4.4 lbs lighter than the predecessor and is much more compact. The rider will benefit with faster lap times due to better rideability and higher performance.
 
Airbox  The new airbox design offers maximum protection of the air filter against soiling, while ensuring maximum airflow in conjunction with lighter intake snorkel that is made of a new material to reduce the deformation due to air intake pulse for improved performance. The new Twin Air filter is easier and safer to mount and can be changed without tools in seconds - a standard and original KTM feature.
 
Battery and Wiring Harness  As in the past, all new SX-F engines are fitted with the proven electric starter a unique KTM feature and a major benefit at all levels of motocross racing. For MY 2016 the SX-F range fits a super compact and lightweight 495 g lithium-ion starter battery into a standard motocross bike, providing safe starting of the engine and reducing the weight by 1 kg over MY 2015!
 
Brakes  High-tech Brembo brakes have always been standard equipment on KTM off-road bikes, and now are combined with newly designed and weight-reduced Wave discs made by GALFER featuring improved heat resistance. Weight reduction is 63g on the front disc, and 32 g for the rear. This is the ultimate solution in braking technology.
 
Seat  Ergonomically perfect, the new seat has a higher foam volume, which offers great comfort and durability, while weighing the same as the previous model.
 
Frame  The new frame design provides approximately 20 % higher torsional rigidity and 30 % less longitudinal stiffness, with newly designed engine stays for less vibration. This increased flexibility results in better absorption of the energy created from the front and rear wheel loads supporting the suspension for more comfort and less rider fatigue. A 0.4 steeper steering angle and a 10 mm shorter wheel base contribute to better handling, and last but not least its lighter than the previous model.
 
Handlebar  The new generation SX models are equipped with a new tapered handlebar made of high-strength aluminum by NEKEN, which is fixed in a new rubber damped handlebar clamp allowing the handlebar to be mounted in two different positions.
 
Footpeg  A new sophisticated "No-Dirt" footpeg solution prevents dirt from blocking the pegs and stopping them from returning to the proper position, even when digging in deep ruts. In addition the new footpegs are larger, more stable, lighter than on previous models and offer more grip.
 
Fuel Tank  All models of the SX range have new lightweight polythene tanks with a capacity of 1.85 gallons. A filler cap with an inside thread makes for an easy and reliable closure.
 
Swingarm  The new SX generation features a reworked cast aluminum swingarm. The updated design offers reduced weight and an optimized flex behavior created with a single-component casting process. The weight reduction is 250 grams.
 
Bodywork  For the new generation of SX models the KTM factory riders were involved in shaping the bodywork together with the specialists from KTM R&D and Kiska Design. The goal was to achieve complete harmony between rider and bike down to the finest details. The results are all-new plastics that provide perfect ergonomics and contact points for the rider, maximum freedom of movement, a lower seat height of between 10 to 20 mm (rear end) and better comfort, especially in the rear part of the seat.
 
Graphics  New modern in-mold graphics highlight the sporty character of the 2016 SX range of cutting-edge motocross bikes.
 
Cooling System  The proven integrated KTM cooling system routes the coolant from the cylinder head through the frame triangle, directly to newly developed aluminum radiators made by WP, which have a new filler cap system and are made of a stiffer alloy. Due to flow optimized internal circulation and CFD-calculated air ventilation, the cooling efficiency has been improved by approximately 10% and the sophisticated radiator guards provide protection in case of a crash.
 
Monoshock  The new generation of monoshock made by WP Suspension has been developed for the new SX models in conjunction with the new frame and swingarm architecture that includes a reworked linkage system and new WP forks. The linkage system has a revised geometry and longer pull rods, which was tested last season in the KTM factory bikes.
 
Triple Clamp  Top quality, CNC-machined triple clamps have been something of a KTM trademark for years. Ensuring precise handling, they provide proper clamping force for correct flex characteristics, thus improving the action of the forks. For 2016 the upper triple clamp features a newly developed rubber damping system for the handlebar clamp in order to reduce the vibration levels felt through the handlebar. The clamps retain their forward and back adjustability for rider preference.
 
Weight Reduction  The main target for the KTM engineers when developing the new SX generation was a massive weight reduction in conjunction with improved handling. The resulting loss of 6.3 lbs is outstanding, making the new KTM models the lightest bikes on the track.
 
Wheels  The 125 SX is fitted with lightweight, CNC-machined hubs, high-end Excel rims and new, weight reduced spokes with lightweight aluminum nipples providing maximum stability at minimum weight. The latest Dunlop Geomax MX32 tires have been developed with KTM factory racing in the USA and expert test riders. They guarantee perfect traction and outstanding performance.
 
Brakes  High-tech Brembo brakes have always been standard equipment on KTM off-road bikes, and now are combined with newly designed and weight-reduced Wave discs made by GALFER featuring improved heat resistance. Weight reduction is 63g on the front disc, and 32 g for the rear. This is the ultimate solution in braking technology.
 
 
 

                                                              

       SHOP BY BRANDS
Go to Acerbis Products
Go to All Balls Racing
Go to Alpinestars offroad and motocross Boots Page
Go to ARC Composite Levers
Go to Micro-Start Power Supply Kit
Go to Arai Helmets
Go to Battery Tender products
Go to BikeMaster Products
Go to Bolt Motorcycle Hardware Products
Go to BRP Page
Go to Bullet Proof Designs
Go to Clarke Manufacturing Gas Tanks Products
Go to CV4 Cooling Products
Go to Cycra Racing Products
Go to DID Racing Chains
Go to Dirt Tricks Products
Go to EBC Brakes
Go to ELine Skid Plates
Go to Enduro Engineering Products
Go to Fasst Company Products
Go to Fastway Products
Go to FMF Products
Go to Flatland Racing Products
Go to G2 Ergonomics Products
Go to Giant Loop Motorcycle Luggage
Go to Hammerhead Products
Go to Heat Demon Handlebar Grip warmers
Go to HiFlo Oil Filters
Go to HotCams Products
Go to IMS Gas Tanks
Go to Ironman Sprockets Products
Go to JD Jetting Products
Go to JT Sprockets
Go to Klim Technical Riding Gear Products
Go to Leatt-Brace Products
Go to Moose Racing Products
Go to Motion Pro Tools
Go to No-Toil Products
Go to Ogio Hydration Back Packs, Flight Vest, Toolbag, and Accessories
Go to Ohlins Steering Stabilizers
Go to Pivot Works Seals and Bearings
Go to Pocket ChainSaw - The World's Fastest Cutting Pocket Saw
Go to Pro Moto Billet Products
Go to ProTaper Grips
Go to Ram Mounts
Go to Rekluse Products
Go to Renthal Sprockets and Chains
Go to Scotts Performance Page
Go to Seat Concepts - Complete Seats and Comfort Seat foam and Cover
Go to Shock Sox Removable Fork Seal Protector
Go to Shorai Batteries
Go to Trail Tech Products
Go to Tubliss Products page
Go to Tugger Products

 
 
 
          1998 - 2017 CycleBuy.com, All rights reserved. / Order Policies / Privacy Policy
Unauthorized use of any images, descriptions, or editorial content without permission is strictly prohibited.
Address:  1116 S Commercial Way SE, Albany, Oregon 97322 U.S.A.