Go to Free Shipping Info

 

    BIKE ACCESSORIES
 Bike Stands
 Body Kits
 Bolt Kits
 Cargo Racks
 Digital Gauges
 Fender Packs
 Footpegs
 Gas Tanks
 Kickstands
 Motorcycle Luggage
 Seats
 Lift Straps
    DRIVE / BRAKES
 Rekluse Clutches
 Chain Adjusters
 Brake Discs
 Brake Pads
 Chains
 Left Hand Rear Brakes
 Sprockets
    ELECTRICAL
 Batteries
 Battery Chargers
 Dual Sport Kits
 Lighting Kits - KTM
 Led Lights
 Switches
 Turn signals
    ENGINE
 Air Filters
 Rekluse Clutches
 Jetting Kits
 Fuel Filters
 Fuel Injection Tuners
 Oil Filters
 Valve Shim Kits
    EXHAUST
 Spark Arrestor Endcaps
 Header Pipes
 Heat Shields - KTM
 Mufflers / Silencers
 Pipeguards
    HANDLEBAR CONTROLS
 Bar End Mounts
 Deflectors
 Grip Heaters
 Grips
 Handguards
 Left Hand Rear Brakes
 Levers
 Mirrors
 Steering Stabilizers
 Switches
 Throttle Cables
 Throttle Cam Systems
    PROTECTION
 Clutch Slave Cylinder
 Disc Guards
 Handguards
 Pipe Guards
 Radiator Guards
 Skid Plates
    RIDER GEAR
 Basegear
 Boots
 Drink Systems
 Fanny Packs
 Gloves
 Helmets
 Jackets
 Jerseys
 Pants
    SUSPENSION
 Fork Seal Doctor
 Fork Seal Protectors
 Seals / Bearings
 Steering Stabilizers
    TOOLS
 Motion Pro Tools
 Pocket Chainsaw
 Rim Locks
 Spoke Torque Wrench
 TiProlight Wrenches
 Tire / Chain Tools
 Tire Changing Stand
 Tire Levers
 Tool Packs

Authorized Dealer for:



Go to BlueRibbon Coalition Website
 
Go to Husqvarna TC 85 pageGo to Husqvarna TC 125 page
Go to 701 ENDURO pageGo to Huqvarna 701 Supermoto 2016 page
 
 

*Call us at 888-284-4588 or 541-928-3390 to see what kind of deal we can put together for you.
MSRP prices do not include destination charge, pre-delivery set-up, state or local, title, registration, and license fees.
2016 TC 125 - The new generation motocross range marks the introduction of the first new two-stroke engine in years. The 125 cc engine is significantly smaller and lighter and features completely redesigned and repackaged internal components, a new power valve and a new exhaust for 40 hp and greatly improved overall performance. The lightweight TC 125 inspires confidence and total control thanks to the stronger brakes, Pro Taper handlebar and ODI lock-on grips.
 
New Engine  With an increase in power output from 38 hp to 40 hp, and a reduction in overall weight from 19.3 kg to 17.2 kg, the new 125 cc engine marks a significant generational step in 2-stroke technology. Kick start is standard but an electric starter is available as a Husqvarna accessories upgrade.
 
New Cylinder and Piston  The new cylinder features a 54 mm bore, revised ports and a new innovative power valve that improves power delivery along the entire rev range. Along with increased performance, the new cylinder has a redesigned water jacket that improves cooling, ensuring greater reliability and durability. The piston has been redesigned to match the new cylinder characteristics.
 
New Crankshaft  The new crankshaft is lighter and balanced differently to the previous generation in order to reduce vibrations. It is now positioned 37 mm higher within the engine in an effort to improve mass-centralization.
 
New Crankcase  The new generation motocross models feature completely redesigned engines with mass-centralization and weight reduction as the main goals. All the major components have been repositioned; on the TC 125 the crankshaft is now 37 mm higher while the clutch shaft has been raised by 27 mm. These modifications required a complete redesign of the crankcases which are now significantly more compact and lighter. The TC 125 crankcases can be fitted with an optional electric starter.
 
New Frame  With years of experience in designing the most advanced steel frames in offroad, the engineers in Research and Development have designed a completely new chromium molybdenum steel frame that redefines every structural aspect in order to improve handling, ergonomics and packaging. The torsional rigidity and longitudinal stiffness have been completely rethought. The 6mm wider and 2mm lower steel tubes offer 20 % more torsional rigidity and 30 % less longitudinal stiffness compared to the previous generation frame design. These characteristics, matched to the new engine stays, improve handling precision while at the same time increasing bump-absorption and feeling.
 
New Carbon Fiber Subframe  The use of carbon fiber strips away weight, improving weight distribution and bringing weight closer to the centre of gravity for precise handling. The composition of the material is now 30 % carbon fiber and the overall 3-piece construction is 1 kg lighter than the previous subframe, for an overall weight of 1.4 kg. It is also more compact as well as being shorter, for greatly improved ergonomics.
 
Revised 4CS Fork  WP's 4CS fork has a revised setup to match the new chassis characteristics of the MY16 generation motocross. As with all 4CS forks by WP, the clicker settings can be easily and quickly adjusted via the dials on the top of the fork tubes. The red dial on the right alters rebound damping, while the white dial on the left is for compression damping.
 
New Rear Suspension  A new, shorter and lighter shock by WP features a larger gas chamber designed to maintain consistent performance during use. New internal components, such as the piston and shock shaft increase setup options. A new clevis design contributes to shortening the overall length by 12 mm, while the stroke is reduced by 3 mm. The shock is completely adjustable for high and low speed compression damping as well as rebound.

The rear link has been completely redesigned to match the new rear shock. 148.2 mm pull rods replace the previous link's 145 mm items and, combined with the redesigned bell crank, maintains a similar progressive rate as MY15. Rear wheel travel is now 300 mm and, thanks to the uprated rear suspension behaviour, softer springs can be used.
 
High Tech Production Processes  High-pressure die cast production processes keep the overall weight of the engine to a minimum, resulting in thin wall thickness of the crankcase. The hydro-formed, laser-cut and robot-welded frame incorporates high quality materials and high tech production processes by WP Performance Systems, for a weight saving of 380 g over the previous generation frame.
 
2-Stroke Performance  The TC 125 represents a new generation of 2-strokes that offer low weight and agile handling for easy access to competition-level motocross, while maintaining low running costs.
 
Completely Redesigned Bodywork  Distinctive and futuristic bodywork highlights the massive performance leap of the MY16 motocross range, while striking pearl blue and electric yellow colors and graphics stylishly adorn the modern design. The ergonomics have been completely revised for improved control and comfort, enabling riders to perform at the highest level for extended periods of time. The seat has a new low-profile design with revised padding and a new high-grip cover for superior comfort and control in all conditions.
 
New Airbox Design  The airbox has been completely redesigned and features a new inlet duct that reduces deformation, ensuring maximum airflow and maximum filter protection. The air filter is easily accessed, without tools, by removing the left side panel. Easy maintenance is guaranteed by the new Twin Air filter and new filter cage design that features a simplified mounting system for safe and accurate filter installation.
 
New Gearbox  200 g lighter and 6 mm narrower, the all-new 6-speed gearbox features the same gear ratios as the outgoing model. The gear lever features a new tip design that prevents dirt build-up.
 
Magura Clutch  The hydraulic Magura clutch guarantees excellent modulation and clutch action.
 
New Footpegs  The new frame features an innovative footpeg mount that prevents mud and dirt build-up, allowing the footpeg to spring back into position even in the toughest conditions. The footpegs are larger for improved grip and stability.
 
Pro Taper Handlebar  The new Pro Taper handlebar is second to none for function and style. Manufactured to exacting standards, the Pro Taper handlebar features class-leading fatigue resistance while meeting stringent weight requirements. Pro Taper logos are chemically applied and are scratch and peel resistant. The large Husqvarna bar pad has optimal impact resistance, while the standard handguards offer maximum roost protection.
 
 

       SHOP BY BRANDS
Go to Acerbis Products
Go to All Balls Racing
Go to Alpinestars offroad and motocross Boots Page
Go to ARC Composite Levers
Go to Micro-Start Power Supply Kit
Go to Arai Helmets
Go to Battery Tender products
Go to BikeMaster Products
Go to Bolt Motorcycle Hardware Products
Go to BRP Page
Go to Bullet Proof Designs
Go to Clarke Manufacturing Gas Tanks Products
Go to CV4 Cooling Products
Go to Cycra Racing Products
Go to DID Racing Chains
Go to Dirt Tricks Products
Go to EBC Brakes
Go to ELine Skid Plates
Go to Enduro Engineering Products
Go to Fasst Company Products
Go to Fastway Products
Go to FMF Products
Go to Flatland Racing Products
Go to G2 Ergonomics Products
Go to Giant Loop Motorcycle Luggage
Go to Hammerhead Products
Go to Heat Demon Handlebar Grip warmers
Go to HiFlo Oil Filters
Go to HotCams Products
Go to IMS Gas Tanks
Go to Ironman Sprockets Products
Go to JD Jetting Products
Go to JT Sprockets
Go to Klim Technical Riding Gear Products
Go to Leatt-Brace Products
Go to Moose Racing Products
Go to Motion Pro Tools
Go to No-Toil Products
Go to Ogio Hydration Back Packs, Flight Vest, Toolbag, and Accessories
Go to Ohlins Steering Stabilizers
Go to Pivot Works Seals and Bearings
Go to Pocket ChainSaw - The World's Fastest Cutting Pocket Saw
Go to Pro Moto Billet Products
Go to ProTaper Grips
Go to Ram Mounts
Go to Rekluse Products
Go to Renthal Sprockets and Chains
Go to Scotts Performance Page
Go to Seat Concepts - Complete Seats and Comfort Seat foam and Cover
Go to Shock Sox Removable Fork Seal Protector
Go to Shorai Batteries
Go to Trail Tech Products
Go to Tubliss Products page
Go to Tugger Products

 
 
 
          1998 - 2017 CycleBuy.com, All rights reserved. / Order Policies / Privacy Policy
Unauthorized use of any images, descriptions, or editorial content without permission is strictly prohibited.
Address:  1116 S Commercial Way SE, Albany, Oregon 97322 U.S.A.