The CNC-machined factory triple clamp has the following properties:
Manufactured from highest grade aluminum
Optimally tuned steering stem stiffness.
100% alignment of the fork tubes.
Perfect flexibility - adapted precisely to the Husaberg WP fork.
spindled after anodizing: With the same tightening torque, this
operation increases the friction between triple clamp and fork tubes, thus practically preventing the fork tubes
from twisting in the triple clamp.
The special steering stem bracket provides additional support for this feature.
adjustment between 19 mm or 22 mm. Dismantling of front wheel and fork is not necessary!
The triple clamp offset is the distance between the
horizontal centre line of both fork tubes and the centre of the
steering axis, by which the fork tubes are offset from the steering axis
(referred to as dimension "X").
The selected offset can be seen at a glance thanks to the
marking on the triple clamp.
Offset setting options: Shorter offset: stability on fast straights
Longer offset: simpler and swifter steering into corners