Free shipping Shopping cart Gift certificates
Husqvarna Accessories:   Brakes   Carbon   Chain/Sprockets   CNC Parts Anodized   Cooling   Electric   Exhaust  
Factory Parts/Engine   Filters   Footpegs  Handlebar/Instruments   Luggage   Navigation   Plastic Parts/Decals  
Protection   Repair Manuals   Seats   Suspension   Tanks   TC 85
  Tools/Transportation   Wheels  
   
  Aftermarket Products
    Availability Guide: If you order an item that is on backorder, we will not charge your card until the order is ready to ship.
     = Normally ships the same business day     = Special order, ships in 4 to 7 business days     = On backorder from the manufacturer
  Electrical   Cost  Add To Cart 
Stator Kit - 55139904100
Fits TE 250/300 2014-16
Provides significantly higher power output and is required for use of the X2 light on all TE models. HQV also recommend extra power when using other additional electrical components, e.g. fan, heated grips, etc. Only for use on 2-stroke bikes with electric starter, since a battery is required.
Instructions
$202.99
 
Auxiliary Wiring Harness - 77711979000
HQV recommend use of this auxiliary wiring harness with all power consuming equipment. With this wiring harness, you have the option of fitting additional power consumers to your motorcycle, such as grip heaters or fans. Required for installation of Digital Fan kit on 2-Stroke models.

$15.99
 
Y-Distributor - 77711979010
The Y-Distributor allows you to connect two power consuming accessories to auxiliary wiring harness 77711979000.

$9.99
 
Y-Distributor w/ Switch - 77711979044
The Y-Distributor Switch allows you to connect two power consumers to the auxiliary wiring harness (77711979000). The connected power consumer can be switched off with the integrated switch. This prevents the battery from being drained unnecessarily.

$22.99
 
Pull Switch Bracket - 77711969044
Fits FE/TE 2014-16
With this bracket the pull switch has an accessible, defined location. Recommended use with Y-Distributor switch 77711979044, above.

$8.99
 
Pull Switch Loose - 55011599000
Stock headlight switch for most KTM/HQV

$21.70
 
Hour Meter - 81312920000
Know exactly when the next service is due.

$41.99
 
Hour Meter Bracket - 78112920044
Fits TC/FC models 2014-18
To mount hour meter (81312920000) onto the triple clamp.
$8.00
 
Grip Heater - 78112964000
Fits FE/TE 2014-18
Ensures warm hands, even in bad weather. May only be fitted by an authorized Husqvarna Motorcycles dealer. HQV recommend use of auxiliary wiring harness 77711979000 for installation.
Instructions
$51.99
 
Carburetor Heating Kit - 55131003044
Fits TE 2014-17
Prevents the carburetor from icing up in winter riding conditions.
Instructions
$62.99
 
Lithium Ion Battery - 79111053000
2.2 lbs. lighter than the standard battery 773.11.053.000 / 3.5 lbs. lighter than the standard battery 585.11.053.000. Unbeatable cost / weight savings ratio. Mountable in any position, as it contains no acid. Battery compartment 25011955044 is additionally required for mounting on FC models from 2016.

$161.02
 
Available to order by 1-2-19
Battery Compartment - 25011955044
Fits FC 2016-18, FX 2017-18
This battery compartment allows you to install extra powerful 5S lithium-ion batteries in your 2016 FC/FX.

$12.99
 
Ignition Curve Switch
4-Stroke
77239974200 - Fits FE 2014-18
2-Stroke 51539974200 - Fits TE 2014-17, TC 2014-18 (in stock)
Closed-course use only. Ignition curve adjustment made easy! With this switch, you can change the ignition curve conveniently from the handlebar on models featuring a CDI with pre-programmed ignition curves. (Whether or not your Husqvarna has pre-programmed ignition curves can be found in the motorcycle owner's manual).

Instructions
$150.99
$83.99
 

   Husqvarna - Aftermarket Products Cost  Go to Item Page 

Enduro Engineering Offroad Lighting Kits
FROM
$119.99

Go to Enduro Engineering
Offroad Lighting Kits
Vision X Solstice Solo Offroad Light Pods
2-inch square LED lights are available in 4 beam patterns, Euro, Elliptical, Spot, and Flood.

$124.99


Go to Vision X Solstice Lights

Enduro Engineering Grip Heaters - Use on any motorcycle/ATV with a battery and charging system or a lighting coil. Install under your grips.
  EE-15054

$35.99
MSRP $39.95


Go to EE Grip Heaters

Shorai LFX Lithium Batteries
LFX09L2-BS12 - 9Ah, 135 CCA 12V eq, 1.27 lbs (SH-09L2) or
LFX14L2-BS12 - 14Ah, 210 CCA 12V eq, 1.68 lbs (SH-14L2)

FROM
$109.99


Go to KTM Shorai Batteries

Battery/Battery Chargers  Go to Battery Tender products Go to Xtreme Charge Battery Chargers Go to BikeMaster TruGel Batteries Go to Shorai Batteries


Go to Battery/Battery Chargers

Larger Images

   Larger Images

Stator Kit 55139904100 Auxiliary Wiring Harness 77711979000
Y- Distributor 77711979010 Y-Distributor w/Switch 77711979044
Pull Switch Bracket 77711969044 Pull Switch Loose 55011599000
Hour Meter 81312920000 Hour Meter Bracket 78112920044
Grip Heater 78112964000 Carburetor Heating Kit 55131003044

Lithium Ion Battery 79111053000
The following benefits are the mark of our lithium-ion batteries:
  Increased Cold Cranking Amps (CCA) value for better engine start in cold temperatures
  2.2 lbs. lighter than the standard battery 773.11.053.000
  3.5 lbs. lighter than the standard battery 585.11.053.000
  Unbeatable cost/weight saving ratio
  Mountable in any position, as it does not contains acid
  Safe technology and long life
Technical data:
  12 V maintenance-free lithium-ion battery
  Capacity 2.0 Ah
  Recommended charging current - 2.5 amps
  Maximum charge current for fast charging - 10 amps
  Fast charge with high charging current (up to 90% in 10 min)
  Very low self-discharge (max. 5% per month)
  Balanced discharge/charge of all cells through balancer
  Contains no heavy metals
Battery compartment 250.11.955.044 is additionally required for mounting on FC models from 2016.
Battery Compartment 25011955044
 
Map Switch 77239974200 4-Stroke Map Switch 51539974200 2-Stroke
Ignition curve adjustment made easy! With this switch, you can change the ignition curve conveniently from the handlebar on models featuring a digital box with pre-programmed ignition curves. (whether or not your Husqvarna has pre-programmed ignition curves can be found in the motorcycle owner's manual).
 
Husqvarna Accessories:   Brakes   Carbon   Chain/Sprockets   CNC Parts Anodized   Cooling   Electric   Exhaust  
Factory Parts/Engine   Filters   Footpegs  Handlebar/Instruments   Luggage   Navigation   Plastic Parts/Decals  
Protection   Repair Manuals   Seats   Suspension   Tanks   TC 85
  Tools/Transportation   Wheels